(PHILTOP Spacers Specs) 4Pcs 1 inch(25mm) Thickness | Vehicle = Wheels Bolt Pattern Must Be 5x4.5"(5x114.3mm) | 60.1mm Center Bore with lip | M12x1.5Threaded Studs/Nuts. Recommended torque: 70-80 ft/lbs.Note: We recommend that you use professional tools for measurement (such as PCD rulers),or refer to the vehicle owner's manual
(Enhance Driving Experience) These 5x4.5" wheel spacers can move your wheels further out from the wheel hub, fix brake caliper clearance issues, correct tire friction issues, increase cornering stability, give your vehicle a more aggressive stance
(Superior Performance): The wheels are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.More durable, more reliable, and more secure
(IMPORTANT!):Before placing the order, please consult/measure the relevant parameters of your car to ensure they are consistent with our products. At the same time, confirm the compatibility by entering the year, make, and model in the "Philtopconfirmedfit" on the top left corner.For important information regarding measurement/installation, please be sure to refer to the product description.
Measure and confirm the bolt pattern, center bore, thread size and spacer thickness before purchasing.
Check the stock stud length. Extended studs may be required if the original studs are too short.
Confirm adequate wheel-to-fender clearance.
Test-fit the spacer. It must sit completely flush against the hub or brake rotor with no gap.
Installation Steps
Step-1: Clean the Mounting Surfaces:Remove all rust, dirt, oil and grease from the hub, studs and mounting surfaces.
Step-2: Install the Inner Plate:Position the inner plate flush against the hub. Install the open-end lug nuts with the tapered ends facing the spacer.
Step-3: Check Stud Clearance:Make sure the nuts sit flush inside the inner plate. If the stock studs interfere with the adapter or wheel, shorten or replace them as required.
Step-4: Install the Outer Plate:Apply thread locker to the first 5–6 threads of the connecting bolts. Install the outer plate and torque the bolts to 50–55 ft-lb (68–75 N·m).
Step-5: Install the Wheel:Start all lug nuts by hand and tighten them evenly in a crisscross pattern with a torque wrench. Do not use an impact wrench.
After Installation
Confirm that the spacer, adapter and wheel sit completely flush with no gaps or interference.
Check that all fasteners are secure and the wheel rotates freely.
Recheck the adapter nuts and bolts after the first 50–100 miles.
Recheck and retorque every 3,000–5,000 miles.
Product Video
Product Description
Reviews
4.8/5
Based on 10 reviews
5
80%
4
20%
3
0%
2
0%
1
0%
R
RUEL REYNOLDS
09/14/2025
Verified buyer
I don’t really leave reviews on a product but these spacers blew me away. They were packaged nicely organized. The spacers themselves felt high quality and solid. And fit perfectly on my Grand Vitara. I was skeptical on how long spacers will last but I have no doubt the philtop spacers with last the life of the vehicle.
M
Mo H.
09/14/2025
Verified buyer
Great product, fits perfectly, great value, simple installation, works exactly as it should, actually very nice looking part shiny. Very pleased with the quality and fitment of the product.
FAQS
Yes. PHILTOP products are made from high-quality materials and are manufactured to strict standards. When installed correctly by a professional and following the instructions, PHILTOP wheel spacers provide reliable and safe performance.
Choosing PHILTOP means choosing quality and peace of mind. Low-quality spacers can compromise safety, but PHILTOP products are engineered for durability and performance. Don’t compromise—trust PHILTOP for safe and high-performing wheel upgrades.
Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
1992-2024 Toyota Camry 2.4L/2.5L/2.2L/3.0L/3.5L/3.3L | 5x4.5" 60.1mm Center Bore M12x1.5 Thread Wheel Hub Accessory | 7495WSA187
(PHILTOP Spacers Specs) 4Pcs 1 inch(25mm) Thickness | Vehicle = Wheels Bolt Pattern Must Be 5x4.5"(5x114.3mm) | 60.1mm Center Bore with lip | M12x1.5Threaded Studs/Nuts. Recommended torque: 70-80 ft/lbs.Note: We recommend that you use professional tools for measurement (such as PCD rulers),or refer to the vehicle owner's manual
(Enhance Driving Experience) These 5x4.5" wheel spacers can move your wheels further out from the wheel hub, fix brake caliper clearance issues, correct tire friction issues, increase cornering stability, give your vehicle a more aggressive stance
(Superior Performance): The wheels are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.More durable, more reliable, and more secure
(IMPORTANT!):Before placing the order, please consult/measure the relevant parameters of your car to ensure they are consistent with our products. At the same time, confirm the compatibility by entering the year, make, and model in the "Philtopconfirmedfit" on the top left corner.For important information regarding measurement/installation, please be sure to refer to the product description.
Measure and confirm the bolt pattern, center bore, thread size and spacer thickness before purchasing.
Check the stock stud length. Extended studs may be required if the original studs are too short.
Confirm adequate wheel-to-fender clearance.
Test-fit the spacer. It must sit completely flush against the hub or brake rotor with no gap.
Installation Steps
Step-1: Clean the Mounting Surfaces:Remove all rust, dirt, oil and grease from the hub, studs and mounting surfaces.
Step-2: Install the Inner Plate:Position the inner plate flush against the hub. Install the open-end lug nuts with the tapered ends facing the spacer.
Step-3: Check Stud Clearance:Make sure the nuts sit flush inside the inner plate. If the stock studs interfere with the adapter or wheel, shorten or replace them as required.
Step-4: Install the Outer Plate:Apply thread locker to the first 5–6 threads of the connecting bolts. Install the outer plate and torque the bolts to 50–55 ft-lb (68–75 N·m).
Step-5: Install the Wheel:Start all lug nuts by hand and tighten them evenly in a crisscross pattern with a torque wrench. Do not use an impact wrench.
After Installation
Confirm that the spacer, adapter and wheel sit completely flush with no gaps or interference.
Check that all fasteners are secure and the wheel rotates freely.
Recheck the adapter nuts and bolts after the first 50–100 miles.
Recheck and retorque every 3,000–5,000 miles.
Product Video
Product Description
Reviews
4.8/5
Based on 10 reviews
5
80%
4
20%
3
0%
2
0%
1
0%
R
RUEL REYNOLDS
Sep 14,2025
Verified buyer
I don’t really leave reviews on a product but these spacers blew me away. They were packaged nicely organized. The spacers themselves felt high quality and solid. And fit perfectly on my Grand Vitara. I was skeptical on how long spacers will last but I have no doubt the philtop spacers with last the life of the vehicle.
M
Mo H.
Sep 14,2025
Verified buyer
Great product, fits perfectly, great value, simple installation, works exactly as it should, actually very nice looking part shiny. Very pleased with the quality and fitment of the product.
FAQS
Yes. PHILTOP products are made from high-quality materials and are manufactured to strict standards. When installed correctly by a professional and following the instructions, PHILTOP wheel spacers provide reliable and safe performance.
Choosing PHILTOP means choosing quality and peace of mind. Low-quality spacers can compromise safety, but PHILTOP products are engineered for durability and performance. Don’t compromise—trust PHILTOP for safe and high-performing wheel upgrades.
Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.