1996-2000 Honda Civic 1.6L L4 | 10 PC Front Upper Control Arm | OE#51460S04023/K9802 - PHILTOP

1996-2000 Honda Civic 1.6L L4 | 10 PC Front Upper Control Arm | OE#51460S04023/K9802 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
54ISCAK2337US

Specifications

Brand
PHILTOP
Items Included
1x Front Left Upper Control Arm and Ball Joint Assembly - K90451 1x Front Right Upper Control Arm and Ball Joint Assembly - K90450 2x Front Lower Ball Joints - K9802 2x Front Stabilizer Bar Links - K90123 2x Front Inner Tie Rod Ends EV367 - EV367 1x Front Outer Tie Rod End - Driver Side - ES3332R 1x Front Outer Tie Rod End - Passenger Side - ES3331R
Quantity
10
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
51460S04023,51450S04013,51460S01A02,51450S01A02,51220S74E00,GSJ499,90112SE000,51220S04003,53540S04013,53560SR0A01,51460S01023,51220SR3003,53540SR0A01,53560S04013,51220SR0A01,51450S01023,53010S04000,53010S04J51,53560SR3003,53540S04003,90112SE0000,51450S04023,53560S04003,53560ST7003,53540ST7003,53540SR3003,90112SK7000
Part Number
K9802,K90123,ES3331R,ES3332R,EV367,MK9802,RK90450,RK90451,MES3331R,MES3332R,MK90123,MEV367,TC836,TC1075,TC1074,TC5047,K90450,K90451,1024857,1024856,CK90450,CK90451,GK90450,GK90451,GK9802,1013789,1014786,CB90451PR,CB90450PR,B9802XL,JBJ947,HNG205,SL59145,GK90123,CB581005PR,RK621117,K621117

Highlights

  • Confirmed Fit: Compatiable with Civic 1996-1998, Civic 1.6L 1999-2000
  • Kit Includes: 2x Front Upper Control Arm and Ball Joint Assembly - K90450 K90451, 2x Front Lower Ball Joint - K9802, 2x Front Sway Bar Link - K90123, 2x Inner Tie Rod End - EV367, 2x Outer Tie Rod End - ES3331 ES3332, **DOES NOT FIT SI MODELS**
  • Superior Quality: Coating with corrosion protection and promoting a longer service life, effectively help reducing the road noise and vibration. The high-strength steel body makes it more stable
  • Long Service Life: Designed to handle severe impacts and repetitive loads through heat-treatment.Coatings to studs inhibit corrosion to promote a long service life
  • Easy to install: Excellent product design and manufacturing technology make PHILTOP control arms better fit your car and make your installation fast and simple

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1996 - 19981999 - 20001996 - 19981999 - 20001996 - 19981999 - 200019981999 - 20001996 - 19981999 - 20001996 - 19981999 - 20001999
MakeHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHonda
ModelCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivic
TrimCXCXDXDXEXEXGXGXHXHXLXLXValue Package
Engine1.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L4
Note-
Exclude Si
-
Exclude Si
-
Exclude Si
-
Exclude Si
-
Exclude Si
-
Exclude Si
Exclude Si

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.6/5

Based on 5 reviews

560%
440%
30%
20%
10%

DIY_Karen_586

10/25/2025

Installation was pretty straightforward on my Civic. All the pieces fit well, and it was easier than I expected. Much better than struggling with individual parts from different places.

Kelly_SUV_Life_223

06/15/2026

This kit was a breeze to install, everything lined up perfectly. It felt much easier than other suspension work I've done. Really happy with how smooth the installation process was.

FAQS

No FAQs have been added for this product yet.