2003-2014 Volvo XC90 2.5L/3.2L/2.9L/4.4L | 14 PC Front Lower Control Arm | OE#30776324/K80501 - PHILTOP

2003-2014 Volvo XC90 2.5L/3.2L/2.9L/4.4L | 14 PC Front Lower Control Arm | OE#30776324/K80501 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1995CAK399VUS

Specifications

Brand
PHILTOP
Items Included
1x Front Left Lower Control Arm Assembly – K640447 1x Front Right Lower Control Arm Assembly – K640446 2x Front Lower Ball Joints – K500153 2x Front Sway Bar End Links – K80501 2x Rear Sway Bar End Links – K80425 1x Outer Tie Rod Ends - Driver Side - ES800858 1x Outer Tie Rod Ends - Passenger Side - ES800857 2x Inner Tie Rod Ends - Driver & Passenger Side - EV800283 (Interchange EV800043) 2x Rack and Pinion Boots W/Bellows & Locking C-Clamps
Quantity
14
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
30760807,274352,31429017,30776324,274499,31202485,31201229,8672449,31201602,30714685,274303,30639780,30639781,31201485,30645845,30645846,274456,31304045,30681615,31201004,30681614,2743030,31304046,31201005,274377,274573,307146850,31212692,312014850,274582,274192,8634736,2741910,312012290,2741920,312012280,312126920,312016020,306479200,30714678,30647920,307146780,8672446,8634869,36050809,312016030,86724460,30760868,2743770
Part Number
K80501,K500153,K80425,EV800283,ES800857,ES800858,274523,RK640446,RK640447,MK80501,MK80425,TC1519,TA2082,TC1173,VLF205,GS10513,GS10643,ER19118,GK80501,SL45015XL,VLL611

Highlights

  • #48,128 in Automotive (See Top 100 in Automotive)
  • #92 in Automotive Replacement Control Arms
  • Fitment: PHILTOP Front Lower Control Arms for 3 2004-2009, 5 2006-2010, 5 2012-2014.
  • Package Contents: 1x Front Lower Left Control Arm + Ball Joint; 1x Front Lower Right Control Arm + Ball Joint; 2x Front Left & Right Sway Bar End Links; 2x Rear Left & Right Sway Bar End Links; 1x Front Right Outer Tie Rod End; 1x Front Left Outer Tie Rod End; 2x Front Inner Tie Rod Ends.
  • Tips: Please check that the control arm is suitable for your vehicle by "Suncentautoconfirmedfit" before purchasing.
  • Long Service Life: Designed to handle severe impacts and repetitive loads through heat-treatment.Coatings to studs inhibit corrosion to promote a long service life.
  • Easy to install: Excellent product design and manufacturing technology make PHILTOP control arms better fit your car and make your installation fast and simple.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 20062007 - 20142013 - 201420032003 - 20052005 - 201120062007 - 2008
MakeVolvoVolvoVolvoVolvoVolvoVolvoVolvoVolvo
ModelXC90XC90XC90XC90XC90XC90XC90XC90
Trim2.5T3.23.2 R-DesignBaseT6V8V8 Ocean RaceV8 Sport
Engine2.5L L53.2L L63.2L L62.5L L52.9L L64.4L V84.4L V84.4L V8
Note--------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.4/5

Based on 13 reviews

554%
431%
315%
20%
10%

Jason_Trucks_127

10/13/2025

Fast shipping and all the parts fit my Mazda 3 perfectly. Installation was pretty easy, and the difference in handling is amazing. Great value.

Amanda_MomOfThree_442

11/18/2025

Driving my Mazda 3 used to be a chore with all the clunks and wobbles. This kit completely transformed the front end. It's smooth and quiet now.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.