2012-2014 Kia Optima 2.4L L4 | 8 PC Front Lower Control Arm | OE#545013S200/ES800717 - PHILTOP

2012-2014 Kia Optima 2.4L L4 | 8 PC Front Lower Control Arm | OE#545013S200/ES800717 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3846CAK4765US

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Control Arm W/Ball Joint - Driver Side - K622825 1x Front Lower Control Arm W/Ball Joint - Passenger Side - K622826 2x Front Stabilizer Sway Bar End Links - Driver & Passenger Side - K750658 2x Front Inner Tie Rod Ends - Driver & Passenger Side - EV800695 1x Front Outer Tie Rod End - Driver Side - ES800717 1x Front Outer Tie Rod End - Passenger Side - ES800718
Quantity
8
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
545013S200,545003S200,545002T030,568202S050,568202S000,545012T030,545012T020,568203Q000,545002T020,568203Q500,568204R500,548303Q000,568203V100,568204R000,545004C000,545014C000,568202S010,568203V490,568202S060,568203V190,577243Q000
Part Number
ES800717,ES800718,K750658,EV800695,RK622826,RK622825,TA3198,TC5707,1017171,TI60300,GS90729,TI60320PR,TI60320,TI60300XL,JTS1460,GS90897

Highlights

  • #48,128 in Automotive (See Top 100 in Automotive)
  • #92 in Automotive Replacement Control Arms
  • Fitment: PHILTOP Front Lower Control Arms for 3 2004-2009, 5 2006-2010, 5 2012-2014.
  • Package Contents: 1x Front Lower Left Control Arm + Ball Joint; 1x Front Lower Right Control Arm + Ball Joint; 2x Front Left & Right Sway Bar End Links; 2x Rear Left & Right Sway Bar End Links; 1x Front Right Outer Tie Rod End; 1x Front Left Outer Tie Rod End; 2x Front Inner Tie Rod Ends.
  • Tips: Please check that the control arm is suitable for your vehicle by "Suncentautoconfirmedfit" before purchasing.
  • Long Service Life: Designed to handle severe impacts and repetitive loads through heat-treatment.Coatings to studs inhibit corrosion to promote a long service life.
  • Easy to install: Excellent product design and manufacturing technology make PHILTOP control arms better fit your car and make your installation fast and simple.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 201320142012 - 201320142014
MakeKiaKiaKiaKiaKia
ModelOptimaOptimaOptimaOptimaOptima
TrimEXEXLXLXSX
Engine2.4L L42.4L L42.4L L42.4L L42.4L L4
Note
After 09/23/2011;Built in USA;Sway Bar End Links;w/ Sport Suspension;with 10.63 inch (270 mm) Stud-to-Stud Length
Built in USA;Sway Bar End Links with 10.63 inch (270 mm) Stud-to-Stud Length;w/Stamped Steel Arm;with 17'' or 18'' Wheels;with Sport Suspension
After 09/23/2011;Built in USA;Sway Bar End Links;w/ Sport Suspension;with 10.63 inch (270 mm) Stud-to-Stud Length
Built in USA;Sway Bar End Links with 10.63 inch (270 mm) Stud-to-Stud Length;w/Stamped Steel Arm;with 17'' or 18'' Wheels;with Sport Suspension
Built in USA;Sway Bar End Links with 10.63 inch (270 mm) Stud-to-Stud Length;w/Stamped Steel Arm;with 17'' or 18'' Wheels;with Sport Suspension

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

5.0/5

Based on 6 reviews

5100%
40%
30%
20%
10%

Mariaelena briceno

05/30/2025

Verified buyer

Buena calidad ajustaron perfectamente

Jennifer_Auto_854

04/12/2026

My alignment issues are a thing of the past since installing this kit. The car tracks straight as an arrow now, and the ride quality has improved dramatically. Big improvement over the worn-out old parts.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.