1997-2006 Jeep Wrangler 4.0L L6/2.4L L4/2.5L L4 | 1x Engine Mount | A2883 - PHILTOP

1997-2006 Jeep Wrangler 4.0L L6/2.4L L4/2.5L L4 | 1x Engine Mount | A2883 - PHILTOP

Fatigue-Resistant

Built to Last

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
99ISEMO1267US

Specifications

Brand
PHILTOP
Items Included
1x Engine Motor Mount- A2883
Position
Front
Quantity
1
Material
Rubber&Iron
Warranty Period
2-Year
Part Number
A2883

Highlights

  • [Vehicle Fitment]: Compatible with 1997-2006 Wrangler 2.5L.
  • [OE Standard]: The Engine Mount are manufactured in accordance with OE standards.Reference Number:A2883.
  • [Package Included]:1x Engine Motor Mount+A2883.
  • (High Quality) We have always been the most high -quality engine and transmission bracket manufacturer. All of our products use the highest quality raw materials. We have the most advanced laboratory equipment to test their products.
  • (After Sales Service)Provide one-year warranty service. If you have any questions, please contact us at any time. Please use Philtop's PartFinder to check whether this mounts are compatible with your vehicle

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20062003 - 20062003 - 20061997 - 20022005 - 20061997 - 20041997 - 20062004 - 20062005 - 20062002 - 2006
MakeJeepJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWrangler
Trim65th Anniversary EditionRubiconSESESESaharaSportUnlimitedUnlimited RubiconX
Engine4.0L L64.0L L62.4L L42.5L L44.0L L64.0L L64.0L L64.0L L64.0L L64.0L L6
Note----------

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

engine motor mountengine motor mount

Reviews

4.5/5

Based on 8 reviews

563%
425%
313%
20%
10%

J Barton

07/10/2024

Verified buyer

Easy fix durable

Chris_GearHead_158

06/09/2026

Bolted right up on my Wrangler, no modifications needed. Installation was simple, and they feel much more solid than my old ones. Glad I went with these.

FAQS

No FAQs have been added for this product yet.