2007-2009 Honda CR-V 2.4L L4 | w/Drain Plug Engine Oil Pan | 264414 - PHILTOP

2007-2009 Honda CR-V 2.4L L4 | w/Drain Plug Engine Oil Pan | 264414 - PHILTOP

Machined

With Drain Plug

Aluminum

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
47ISTOP0727US

Specifications

Brand
PHILTOP
Drain Plug Included
Yes
Screws Included
No
Gasket Included
No
Material
Aluminum
Surface Finish
Machined
Items Included
1x Engine Oil Pan With Drain Plug - 264414
Color
Silver
Warranty Period
2-Year
Part Number
264414,SK264414,HOP15A,A260241

Highlights

  • Vehicle Fitment: PHILTOP Engine Oil Pan fits Honda CR-V 2007 2008 2009 2.4L
  • Precision Design: PHILTOP engine oil pan is made of high quality material, the shell is of high strength, not easy to deform and aging, after heavy quality testing, not afraid of high temperature, good product performance and long service life
  • Ideal Replacement: PHILTOP engine oil pan can avoid impurities into the oil tank, collect and store the lubricant flowing back from the friction surface of the engine, avoid lubricant oxidation
  • Professional Services - If there is a problem with the product, PHILTOP provide you with a free return/exchange service. You can use the Fitment Guide to check the suitability of your model before purchase. Please feel free to contact us with any questions regarding our products and services
  • Reference Number: 264-414, 264414, HOP15A, 11200-RZA-000, 11200RZA000. Please check your part number before purchase to make sure it matches your model. Kit includes: 1* Engine Oil Pan with Drain Plug. Gasket not included

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2007 - 20092007 - 20092007 - 2009
MakeHondaHondaHonda
ModelCR-VCR-VCR-V
TrimEXEX-LLX
Engine2.4L L42.4L L42.4L L4
Note---

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the new oil pan’s material, mounting holes and drain-plug position match the original.
  • Prepare the correct gasket or oil-resistant sealant, new drain-plug washer, specified oil and filter.
  • Inspect the new pan and mounting flange for cracks, deformation or damage.
  • Allow the engine or transmission to cool, then support the vehicle securely with jack stands. Never work under a vehicle supported only by a jack.

Installation Steps

  • Step-1: Drain the Oil:Allow the system to cool, then drain the oil completely. Hot oil may cause burns.
  • Step-2: Remove the Old Oil Pan:Disconnect obstructing components, loosen the bolts diagonally, and carefully remove the pan.
  • Step-3: Clean the Mating Surface:Remove all oil, debris, and old sealant. Do not scratch or sand the sealing surface.
  • Step-4: Apply the Gasket or Sealant:Install a new gasket or apply an even bead of approved sealant. Do not reuse the old gasket or apply excessive sealant.
  • Step-5: Install the New Oil Pan:Align the pan, hand-start all bolts, and tighten them diagonally in stages to the specified torque. Allow the sealant to cure as directed.
  • Step-6: Complete the Installation:Install a new drain-plug washer, reconnect all removed components, and replace the oil filter when required.

After Installation

  • Refill with the specified oil before starting the engine.
  • Wait 2–3 minutes, check the oil level and top up as required.
  • Idle the engine for 3–5 minutes and inspect the drain plug and sealing surface for leaks.
  • Confirm that the oil-pressure warning light turns off.
  • Perform a short 5–10 km road test and inspect again after the first heat cycle.
  • If an oil leak or oil-pressure warning appears, shut off the engine immediately.

Product Description

12

Reviews

4.7/5

Based on 9 reviews

578%
411%
311%
20%
10%

Rob G

05/27/2025

Verified buyer

great replacement, great value, solved my problem

Bruce

08/28/2024

Verified buyer

Good product

FAQS

Use the engine manufacturer’s torque and tightening sequence. Oil pan bolts are often small, and overtightening may strip threads, distort the flange, or cause leaks.

Remove old gasket material and oil without damaging the mating surface. Prevent debris from entering the engine and make sure the surface is clean and dry before sealing.

A direct-replacement pan is generally intended to match the original design, but capacity can vary by application. Refill according to the vehicle specification and verify with the dipstick or level system.