2006 BMW 325i 3.0L L6 | w/Gasket ,w/Drain Plug Transmission Oil Pan | 265851 - PHILTOP

2006 BMW 325i 3.0L L6 | w/Gasket ,w/Drain Plug Transmission Oil Pan | 265851 - PHILTOP

With Drain Plug

Plastic

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
22ISTOP0407US

Specifications

Brand
PHILTOP
Drain Plug Included
Yes
Screws Included
No
Gasket Included
Yes
Material
Plastic
Surface Finish
Powder-Coated
Items Included
1x Transmission Oil Pan With Drain Plug and Gasket - 265851
Color
Black
Warranty Period
2-Year
Part Number
265851

Highlights

  • [Vehicle Fitment]: 2011-2013 328i, 2007-2011 335i, 2007-2010 X5 3.0L, 2006 325i; 330i; 325xi; 330xi, 2007-2008 328xi, 2004-2007 530i; 525i, 2008-2010 528i; 535i; 135i; X6 3.0L, 2006-2011 Z4 2.5/3.0/3.2L Naturally Aspirated, 2010-2013 128i, 2006-2007 530xi; 525xi, 2008 535xi; 528xi, 2011-2012 740Li; 740i
  • [Reference Part Number]: 265851,1071298033,6HP19Z,24152333907,24117571217,24117536387
  • [Package Contents]: 1x Transmission Oil Pan With Drain Plug and Gasket - 265851
  • [Lightweight & Reliable]: Crafted from high-strength engineered plastic, this oil pan delivers outstanding corrosion and rust resistance, ensuring long service life in harsh conditions. Its lightweight design eases engine load while dampening noise and vibration. Precision OE-matched contours enable direct bolt-on installation, providing a cost-effective, dependable replacement with consistent oil retention for daily-driven vehicles.
  • [Secure Sealing]: This oil pan ensures dependable leak prevention even under fluctuating temperatures, thanks to its smooth sealing surface. Heat-resistant plastic construction resists warping and oil corrosion, effectively safeguarding the engine’s lubrication system.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20132008 - 2010200620062012 - 20132011 - 201320132011 - 20132007 - 2008200620062007 - 20112009 - 20112004 - 20052006 - 20072006 - 20072008 - 20102009 - 201020082004 - 20072006 - 20072008 - 20102009 - 201020082011 - 20122011 - 20122007 - 20082009 - 20102008 - 20102006 - 20082006 - 20082006 - 20082009 - 2011
MakeBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMWBMW
Model128i135i325i325xi328i328i328i xDrive328i xDrive328xi330i330xi335i335i xDrive525i525i525xi528i528i xDrive528xi530i530xi535i535i xDrive535xi740Li740iX5X5X6Z4Z4Z4Z4
TrimBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBase3.0sixDrive30ixDrive35iCoupe 3.0siRoadster 3.0iRoadster 3.0sisDrive30i
Engine3.0L L63.0L L63.0L L63.0L L62.0L L43.0L L62.0L L43.0L L63.0L L63.0L L63.0L L63.0L L63.0L L62.5L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L63.0L L6
Note---------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the new oil pan’s material, mounting holes and drain-plug position match the original.
  • Prepare the correct gasket or oil-resistant sealant, new drain-plug washer, specified oil and filter.
  • Inspect the new pan and mounting flange for cracks, deformation or damage.
  • Allow the engine or transmission to cool, then support the vehicle securely with jack stands. Never work under a vehicle supported only by a jack.

Installation Steps

  • Step-1: Drain the Oil:Allow the system to cool, then drain the oil completely. Hot oil may cause burns.
  • Step-2: Remove the Old Oil Pan:Disconnect obstructing components, loosen the bolts diagonally, and carefully remove the pan.
  • Step-3: Clean the Mating Surface:Remove all oil, debris, and old sealant. Do not scratch or sand the sealing surface.
  • Step-4: Apply the Gasket or Sealant:Install a new gasket or apply an even bead of approved sealant. Do not reuse the old gasket or apply excessive sealant.
  • Step-5: Install the New Oil Pan:Align the pan, hand-start all bolts, and tighten them diagonally in stages to the specified torque. Allow the sealant to cure as directed.
  • Step-6: Complete the Installation:Install a new drain-plug washer, reconnect all removed components, and replace the oil filter when required.

After Installation

  • Refill with the specified oil before starting the engine.
  • Wait 2–3 minutes, check the oil level and top up as required.
  • Idle the engine for 3–5 minutes and inspect the drain plug and sealing surface for leaks.
  • Confirm that the oil-pressure warning light turns off.
  • Perform a short 5–10 km road test and inspect again after the first heat cycle.
  • If an oil leak or oil-pressure warning appears, shut off the engine immediately.

Product Description

12

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Nancy_FirstCar_901

06/17/2026

Super fast shipping and the pan was packed very carefully. It's a perfect fit for my 528i, and the drain plug is a nice touch. I was impressed with how quickly it got here. Customer service was also very responsive to my inquiry.

Lisa_CivicDriver_467

04/02/2026

This transmission oil pan looks great, very sturdy and well-made. The drain plug is a huge plus. For the price, it's an excellent deal and saved me a bunch compared to the dealership. Highly recommend this for your BMW.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.