1990-1997/1999-2005 Mazda Miata 1.8L/1.6L | 2x Engine Mount | 8909 - PHILTOP

1990-1997/1999-2005 Mazda Miata 1.8L/1.6L | 2x Engine Mount | 8909 - PHILTOP

Fatigue-Resistant

Built to Last

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
99ISMON1EMO2157US

Specifications

Brand
PHILTOP
Items Included
1x Front Left Motor Mount - A4400 1x Front Right Motor Mount - A4400
Position
Front, Right, Left
Quantity
2
Material
Rubber&Iron
Warranty Period
2-Year
Part Number
8909

Highlights

  • (Vehicle Fitment)PHILTOP Engine Mount Transmission Mount Kit Compatible With Mazda 1990-1993 Miata 1.6L, 1994-1997 Miata 1.8L, 1999-2005 Miata 1.8L
  • (OEM Number)PHILTOP Engine Motor are manufactured in accordance with OE standards. Replace OE Number# A4400, 8909
  • (Package Included)PHILTOP Engine Motor Mount Transmission Mount Torque Strut Mount Set Package Included: 1x Front Left Motor Mount +A4400/8909, 1x Front Right Motor Mount + A4400/8909
  • (High Performance)The engine mounts are made of natural rubber and metal materials, adapting to cold, high temperature and extreme environment of the engine compartment. Improve NVH performance, reduce high-frequency vibration 20-200Hz, reduce vehicle vibration amplitude by about 70%, and reduce cockpit noise by 5-10 db, able to withstand extreme environments of -40℃ and 120℃.
  • (Installation Instructions): 1. Align all bolts; 2. Gently screw the bolts into the holes; 3. Tighten all bolts simultaneously(Do not tighten them one by one). The heat shield can be bent for easy installation, but be sure to clean the adhesive in the installation area before installation and restore any bent areas from disassembly to a flat state.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year19991990 - 19931994 - 19971999 - 200519932000 - 20051994 - 19972004 - 200519912000 - 200319972003
MakeMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazda
ModelMiataMiataMiataMiataMiataMiataMiataMiataMiataMiataMiataMiata
Trim10th AnniversaryBaseBaseBaseLELSM EditionMazdaspeedSESESTOShinsen
Engine1.8L L41.6L L41.8L L41.8L L41.6L L41.8L L41.8L L41.8L L41.6L L41.8L L41.8L L41.8L L4
Note------------

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

PHILTOP ENGINE MOUNTEngine MOTOR MOUNT

Reviews

4.7/5

Based on 7 reviews

571%
429%
30%
20%
10%

Loginfailed

06/19/2025

Verified buyer

Recieved these as part of the Vine program. Helping out my cousin with his old Miata. Both his mounts were torn and these worked perfect to keep the engine from moving under load. The fit well and the rubber seems similar to the originals. The price is good compared to the local parts stores.

José Daniel Jiménez Añez

01/27/2025

Verified buyer

Buena calidad

FAQS

No FAQs have been added for this product yet.