2008-2013 Nissan Rogue 2.5L | 2x Aluminum Alloy Engine Mount | A4351 - PHILTOP

2008-2013 Nissan Rogue 2.5L | 2x Aluminum Alloy Engine Mount | A4351 - PHILTOP

Aluminum Alloy

Fatigue-Resistant

Built to Last

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
93ISMON1EMO3717US

Specifications

Brand
PHILTOP
Items Included
1x Front Upper Torque Strut Mount - A4351 1x Front Lower Torque Strut Mount - A4352
Position
Front
Quantity
2
Material
Aluminium Alloy&Iron
Warranty Period
2-Year
Part Number
A4351,A4352

Highlights

  • (Vehicle Fitment) PHILTOP Engine Mount Transmission Mount Kit Fit for Nissan Rogue 2008-2013, for Nissan Rogue Select 2014-2015, for Nissan Sentra 2007-2012 2.5L
  • (OEM Number)Replace OE Number# A4351, A4352
  • (Package Included)1x Front Upper Torque Strut Mount (A4351), 1x Front Lower Torque Strut Mount (A4352)
  • (High Performance)The engine mounts are made of natural rubber and metal materials, adapting to cold, high temperature and extreme environment of the engine compartment. Improve NVH performance, reduce high-frequency vibration 20-200Hz, reduce vehicle vibration amplitude by about 70%, and reduce cockpit noise by 5-10 db, able to withstand extreme environments of -40℃ and 120℃.
  • (Installation Instructions): 1. Align all bolts; 2. Gently screw the bolts into the holes; 3. Tighten all bolts simultaneously(Do not tighten them one by one). The heat shield can be bent for easy installation, but be sure to clean the adhesive in the installation area before installation and restore any bent areas from disassembly to a flat state.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20102008 - 201320112008 - 20102011 - 20132014 - 20152007 - 20122007 - 2012
MakeNissanNissanNissanNissanNissanNissanNissanNissan
ModelRogueRogueRogueRogueRogueRogue SelectSentraSentra
TrimKromSS KromSLSVSSE-RSE-R Spec V
Engine2.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L4
Note
Front Upper Solid Front Lower Solid
Front Upper Solid Front Lower Solid
Front Upper Solid Front Lower Solid
Front Upper Solid Front Lower Solid
Front Upper Solid Front Lower Solid
Solid
Front Upper Solid Front Lower Solid
Front Upper Solid Front Lower Solid

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

PHILTOP ENGINE MOUNTEngine MOTOR MOUNT

Reviews

4.8/5

Based on 5 reviews

580%
420%
30%
20%
10%

Customer

07/31/2026

Verified buyer

Pieza correcta.

Maliyah Chase

02/23/2025

Verified buyer

Part fit like a glove!

FAQS

No FAQs have been added for this product yet.