2003-2008 Toyota Corolla 1.8L L4 | Front Left, 2 PC Steering Knuckle | 698389 - PHILTOP

2003-2008 Toyota Corolla 1.8L L4 | Front Left, 2 PC Steering Knuckle | 698389 - PHILTOP

Front

Wheel Bearing Included

4.3

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
93ISSKB0107US

Specifications

Brand
PHILTOP
Position
Front
Material
Steel
Items Included
1x Front Steering Knuckle Wheel Hub Bearing - 698-389 1x Front Steering Knuckle Wheel Hub Bearing - 698-388
Wheel Bearing Included
Yes
Quantity
2
Warranty Period
2-Year
Part Number
698389,698388

Highlights

  • [Fitment] This steering knuckle & wheel bearing hub assembly compatible with Corolla 2003-2008 which replaces 698-389 698-388.
  • [Kit Includes] If you purchase this, you will receive steering knuckle & wheel bearing hub assembly, you will receive 2PCS front left and right passenger and driver side steering knuckle and hub assembly.
  • [OE Replacement Number] 698389, 698388, 698-389, 698-388, LK029, LK030.
  • [Specification] Installation Position: Front Left and Right Driver and Passenger Side; Condition: Brand New; Material: Steel; Loaded Knuckle Included: Yes; Hub Included: Yes; Bearing Included: Yes; Axle Included: No.
  • [Ideal Replacement] This steering knuckle hub bearing assembly can help you resolve those problems: ① hard braking ② difficult turning of wheels ③ uneven tire wear ④ vehicle pulling ⑤ wheel vibration and wobble.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 20082003 - 20082003 - 20082005 - 2006
MakeToyotaToyotaToyotaToyota
ModelCorollaCorollaCorollaCorolla
TrimCELESXRS
Engine1.8L L41.8L L41.8L L41.8L L4
Note----

How to Install?

Checks Before Installation

  • Confirm the steering knuckle matches the vehicle, installation position and related components.
  • Inspect the wheel bearing, hub, ball joint and mounting points for damage or wear.
  • Prepare a professional vehicle lift, safety stands and torque wrench.
  • Do not use an impact wrench or hammer to force components into place.

Installation Steps

  • Step-1: Secure the Vehicle:Raise the vehicle with a professional lift and support it securely with safety stands.
  • Step-2: Remove the Components:Remove the wheel, brake components, ABS sensor, tie-rod end and other connected suspension parts.
  • Step-3: Transfer the Hub and Bearing:Use the correct press and adapters to remove or install the hub and bearing. Never hammer a new bearing or expose it to axial impact.
  • Step-4: Install the Steering Knuckle:Position the steering knuckle and hand-start all mounting bolts to prevent cross-threading.
  • Step-5: Reconnect the Components:Reconnect the ball joint, tie-rod end, strut, ABS sensor and brake components in their original positions.
  • Step-6: Torque All Fasteners:Use a torque wrench and tighten every fastener to the value specified in the vehicle service manual. Do not estimate torque or use an impact wrench for final tightening.

After Installation

  • Confirm all fasteners, brake components and ABS connections are secure.
  • Check for smooth wheel rotation, abnormal play or interference.
  • Perform a low-speed road test and check for noise, vibration or steering pull.
  • A professional four-wheel alignment is required after installation. Use a qualified alignment shop with professional equipment; a basic repair shop may not be able to complete the required calibration.

Product Video

Product Description

12

Reviews

4.3/5

Based on 3 reviews

533%
467%
30%
20%
10%

CarGuy_John_641

10/09/2025

These were a breeze to install, way easier than the last set I bought from another brand. Everything lined up perfectly, no wrestling required. Definitely recommend if you're doing this yourself.

Lápiz

05/13/2025

Verified buyer

Queda perfecto en Toyota corola se 2003 1.8

FAQS

Check the sensor, wiring, connector, encoder ring, and installation clearance. A scan may help identify the affected circuit, as the warning can have several causes.

Inspect the wheel bearing, hub, ball joint, tie-rod end, brake mounting points, ABS sensor, backing plate, and axle splines for wear or damage.

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.