2005-2009 Audi A4 1.8L | 1.1KW 9-Tooth Starter | 17975N - PHILTOP

2005-2009 Audi A4 1.8L | 1.1KW 9-Tooth Starter | 17975N - PHILTOP

Power: 1.1 kW

Pinion Teeth: 9

Quick Starting Response

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5996STM1890US

Specifications

Brand
PHILTOP
Power
1.1 kW
Pinion Teeth
9
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 17975N 1x Manual
Warranty Period
2-Year
Part Number
17975N

Highlights

  • Vehicle Fitment: 1990-2011 Ranger 4.0L, 1991-2002 Explorer 4.0L, 2005-2009 Mustang 4.0L, 2002-2003 Explorer Sport Trac 4.0L, 1994-2007 B4000 4.0L, 1991-1994 Navajo 4.0L, 2008-2009 B4000
  • OEM Number: F87U11000BA、F87U11000B1B、F87U11000B1A、1F8518400、1F8218400A、F87UB1A、F87Z11002BA、F87UB1B、6L5Z11002CA、F87UBA、F0TZ11002A、ZZP518400、ZZP518400A、3240N、F87Z11002BARM
  • Starter Specification: ①Power Rating: 1.4KW; ②Voltage: 12V; ③Number of Teeth: 10 teeth; ④Specs for: Ford PMGR PMGR; ⑤ROTATION: CW
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H salt spray resistance, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
  • Efficient Quiet: Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200520052006 - 2009200520062007 - 2008200520052005
MakeAudiAudiAudiAudiAudiAudiVolkswagenVolkswagenVolkswagen
ModelA4A4A4A4A4A4PassatPassatPassat
TrimBaseBaseBaseCabrioletCabrioletCabrioletGLGLSGLS 4 Motion
Engine1.8L L42.0L L42.0L L41.8L L41.8L L42.0L L41.8L L41.8L L41.8L L4
Note
From Chassis 8E5030001
From Chassis 8E5030001
-
From Chassis 8E5030001
-----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter motorstarter motor

Reviews

5.0/5

Based on 1 review

5100%
40%
30%
20%
10%

Juan lopez

04/26/2026

Verified buyer

Muy bueno

FAQS

PHILTOP Starter are specifically designed for [specific vehicle models]. Rigorously tested to OE standards. You can check the vehicle compatibility and product images to ensure a perfect match.

Yes. Follow your vehicle’s instructions; on most conventional vehicles, disconnect the negative terminal first.

Yes, if they are undamaged and connect securely. Replace badly corroded, frayed, or melted cables.

2005-2009 Audi A4 1.1KW Starter 17975N | PHILTOP