2000 Chevrolet Suburban 1500 5.3L | 1.5KW 11-Tooth Starter | OE#9000842 - PHILTOP

2000 Chevrolet Suburban 1500 5.3L | 1.5KW 11-Tooth Starter | OE#9000842 - PHILTOP

Power: 1.5 kW

Pinion Teeth: 11

Quick Starting Response

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
9495STM1717US

Specifications

Brand
PHILTOP
Power
1.5 kW
Pinion Teeth
11
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 6488N 1x Manual
Warranty Period
2-Year
OE Number
10465463,12560672,6488,9000842

Highlights

  • Vehicle Fitment: 1990-2011 Ranger 4.0L, 1991-2002 Explorer 4.0L, 2005-2009 Mustang 4.0L, 2002-2003 Explorer Sport Trac 4.0L, 1994-2007 B4000 4.0L, 1991-1994 Navajo 4.0L, 2008-2009 B4000
  • OEM Number: F87U11000BA、F87U11000B1B、F87U11000B1A、1F8518400、1F8218400A、F87UB1A、F87Z11002BA、F87UB1B、6L5Z11002CA、F87UBA、F0TZ11002A、ZZP518400、ZZP518400A、3240N、F87Z11002BARM
  • Starter Specification: ①Power Rating: 1.4KW; ②Voltage: 12V; ③Number of Teeth: 10 teeth; ④Specs for: Ford PMGR PMGR; ⑤ROTATION: CW
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H salt spray resistance, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
  • Efficient Quiet: Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1999 - 20001999 - 20001999 - 20001999 - 20001999 - 20001999 - 20001999 - 20001999 - 20001999 - 20002000200020002000200020002000200020001999 - 20001999 - 20001999 - 20001999 - 20001999 - 20001999 - 20001999 - 20001999 - 20001999 - 2000200020002000200020002000
MakeChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMCGMC
ModelSilverado 1500Silverado 1500Silverado 1500Silverado 1500Silverado 1500Silverado 1500Silverado 2500Silverado 2500Silverado 2500Suburban 1500Suburban 1500Suburban 1500TahoeTahoeTahoeTahoeTahoeTahoeSierra 1500Sierra 1500Sierra 1500Sierra 1500Sierra 1500Sierra 1500Sierra 2500Sierra 2500Sierra 2500YukonYukonYukonYukonYukon XL 1500Yukon XL 1500
TrimBaseBaseLSLSLTLTBaseLSLTBaseLSLTBaseBaseLSLSLTLTSLSLSLESLESLTSLTSLSLESLTSLESLESLTSLTSLESLT
Engine4.8L V85.3L V84.8L V85.3L V84.8L V85.3L V85.3L V85.3L V85.3L V85.3L V85.3L V85.3L V84.8L V85.3L V84.8L V85.3L V84.8L V85.3L V84.8L V85.3L V84.8L V85.3L V84.8L V85.3L V85.3L V85.3L V85.3L V84.8L V85.3L V84.8L V85.3L V85.3L V85.3L V8
Note---------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter motorstarter motor

Reviews

5.0/5

Based on 7 reviews

5100%
40%
30%
20%
10%

Customer photos and videos

C.C.G.C.C.G.

07/29/2026

Verified buyer

Very impressed with the quality. Installation was straightforward and it fit perfectly without any modifications. The truck fired right up on the first turn and starts much faster now than it did before.The starter quality feels solid and durable, and it’s been working flawlessly since installation. Great value compared to OEM pricing, and it saved me from bring it in to get fixed. Highly recommend this starter if you need a reliable replacement for your Chevy.

Jeff & LynzJeff & Lynz

06/29/2026

Verified buyer

I have a 1999 Tahoe with the 5.3 v8 and this starter was a direct fit, I had no issues what so ever on installing it. As soon as I hit the key wala I was up and running once again. They even provided the test printout of the starter from when they test it before shipment. A+

FAQS

Proven in extreme temperatures, our starter delivers powerful torque and rapid response. Built with premium field coils and all-copper windings, its compact design ensures reliable operation and extended service life.

Not necessarily. Keep your existing battery if it tests good and holds a charge.

The engine should crank smoothly without grinding. If the starter keeps running after the engine starts, switch off immediately.