2011-2016 Dodge Challenger 3.6L V6 | 1.3KW 9-Tooth Starter | 19185N - PHILTOP

2011-2016 Dodge Challenger 3.6L V6 | 1.3KW 9-Tooth Starter | 19185N - PHILTOP

Power: 1.3 kW

Pinion Teeth: 9

Quick Starting Response

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7948STM068AUS

Specifications

Brand
PHILTOP
Power
1.3 kW
Pinion Teeth
9
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 19185N 1x Manual
Warranty Period
2-Year
Part Number
19185N

Highlights

  • Vehicle Fitment: 1990-2011 Ranger 4.0L, 1991-2002 Explorer 4.0L, 2005-2009 Mustang 4.0L, 2002-2003 Explorer Sport Trac 4.0L, 1994-2007 B4000 4.0L, 1991-1994 Navajo 4.0L, 2008-2009 B4000
  • OEM Number: F87U11000BA、F87U11000B1B、F87U11000B1A、1F8518400、1F8218400A、F87UB1A、F87Z11002BA、F87UB1B、6L5Z11002CA、F87UBA、F0TZ11002A、ZZP518400、ZZP518400A、3240N、F87Z11002BARM
  • Starter Specification: ①Power Rating: 1.4KW; ②Voltage: 12V; ③Number of Teeth: 10 teeth; ④Specs for: Ford PMGR PMGR; ⑤ROTATION: CW
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H salt spray resistance, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
  • Efficient Quiet: Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2011 - 20142013 - 20162013 - 20142015 - 20162011 - 20122015 - 20162012 - 2016201420112012 - 201620122015 - 20162011 - 20162011 - 20162012 - 201620122011 - 20152011 - 2013201120112014 - 20152014 - 20152012 - 20152012 - 20152013 - 20152013 - 20152013 - 20152014 - 2015201420142013 - 2014201420142013 - 20142013 - 20142013 - 2014
MakeChryslerChryslerChryslerChryslerChryslerChryslerChryslerDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeJeepJeepJeepJeepRamRamRamRamRamRamRamRam
Model300300300300300300300ChallengerChallengerChallengerChallengerChallengerChargerChargerChargerChargerDurangoDurangoDurangoDurangoDurangoDurangoDurangoDurangoGrand CherokeeGrand CherokeeGrand CherokeeGrand Cherokee15001500150015001500150015001500
TrimBaseCC LuxuryC PlatinumLimitedLimitedSRallye RedlineSESXTSXT PlusSXT PlusPursuitSESXTSXT PlusCitadelCrewExpressHeatLimitedRallyeSXTSpecial ServiceLaredoLimitedOverlandSummitBig HornExpressHFELaramieLone StarOutdoorsmanSLTTradesman
Engine3.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V6
Note----------------------------
Exc. Stop/Start Feature
Exc. Stop/Start Feature
Exc. Stop/Start Feature
Exc. Stop/Start Feature
Exc. Stop/Start Feature
Exc. Stop/Start Feature
Exc. Stop/Start Feature
Exc. Stop/Start Feature

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter motorstarter motor

Reviews

4.6/5

Based on 16 reviews

575%
413%
313%
20%
10%

SarahDrives_234

04/28/2026

Swapped this into my Mustang and the difference is night and day. It cranks over much faster and sounds a lot healthier than the old one.

CarGuy_John_31

03/02/2026

No more crossing my fingers every time I turn the key in my Explorer. It starts up way more reliably than it used to.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Yes, if they are undamaged and connect securely. Replace badly corroded, frayed, or melted cables.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.