2007-2009 Suzuki SX4 2.0L L4 | Tensioner | OE#1754077E00/38156 - PHILTOP

2007-2009 Suzuki SX4 2.0L L4 | Tensioner | OE#1754077E00/38156 - PHILTOP

Quiet Operation

Slip Resistant

Corrosion & Heat-Resistant Housing

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
36ISETB0867US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Belt Included
No
Belt Type
V-Ribbed
Contact Surface
Smooth/Backside
Pulley Outer Diameter
3.54 in
Items Included
1x Engine Timing Belt Tensioner - 38156
Quantity
1
Warranty Period
2-Year
OE Number
1754077E00,1754077E10,1754077EA3,1754077EA0,91176512,91174497,91175578,1754077EA1
Part Number
38156

Highlights

  • (OE Reference Number)-- 38156, 999032, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
  • (Fitment)--PHILTOP Belt Tensioner with Pulley Replacement For Tracker 1999-2003, Aerio 2002-2007, Esteem 1999-2002, SX4 2007-2009, Sidekick 1996-1998, Vitara 1999-2003
  • (Labyrinth Seal Protection)-- PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
  • (Absorption of extreme vibration for longer life)-- The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
  • (Torsion spring is stable and reliable)---Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1999 - 20031999 - 20002001 - 20032001 - 20032006 - 20072002 - 20032004 - 20052006 - 20072002 - 20032004 - 20052002 - 20032004 - 200620061999 - 20021999 - 20021999 - 20022007 - 20092007 - 20091996 - 19981997 - 19981996 - 199820032000 - 20022000 - 20021999 - 200119991999 - 20011999
MakeChevroletChevroletChevroletChevroletSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzukiSuzuki
ModelTrackerTrackerTrackerTrackerAerioAerioAerioAerioAerioAerioAerioAerioAerioEsteemEsteemEsteemSX4SX4SidekickSidekickSidekickVitaraVitaraVitaraVitaraVitaraVitaraVitara
TrimBaseLSiLTZR2BaseGSLXPremiumSSSXSXSX PremiumGLGLXGLX PlusBaseSportJLX SportJS SportJX SportBaseJLSJLXJSJS PlusJXJX Plus
Engine2.0L L42.0L L42.0L L42.0L L42.3L L42.0L L42.3L L42.3L L42.0L L42.3L L42.0L L42.3L L42.3L L41.8L L41.8L L41.8L L42.0L L42.0L L41.8L L41.8L L41.8L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L4
Note----------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
  • Inspect the pulleys for binding, looseness or abnormal bearing noise.
  • Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
  • Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
  • Disconnect the negative battery cable before installation.

Installation Steps

  • Step-1: Photograph or record the belt-routing path before removing the belt.
  • Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
  • Step-3: Remove the belt and tensioner, then clean the mounting surface.
  • Step-4: Position the new tensioner and tighten its mounting bolts to specification.
  • Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
  • Step-6: Slowly release the tensioner and recheck the complete belt path.

After Installation

  • Confirm the tensioner bolts are secure and the belt is correctly seated.
  • Start the engine and observe the belt tracking and tensioner movement.
  • Check for belt slipping, jumping, lateral movement or abnormal noise.
  • Confirm the alternator and all belt-driven accessories operate normally.

Product Description

11

Reviews

4.6/5

Based on 10 reviews

570%
420%
310%
20%
10%

Frank Chase

07/22/2023

Verified buyer

The price was acceptable, the fit and finish was acceptable, the packaging was secure.

Chris_GearHead_703

10/25/2025

Installed this tensioner on my SX4 and it's working perfectly. Installation was straightforward and it fit without any issues. A great option compared to more expensive brands.

FAQS

No FAQs have been added for this product yet.