2005-2010 Chevrolet Cobalt 2.2L L4/2.4L L4 | 3x Aluminum Alloy Engine Mount | A5374 - PHILTOP

2005-2010 Chevrolet Cobalt 2.2L L4/2.4L L4 | 3x Aluminum Alloy Engine Mount | A5374 - PHILTOP

Aluminum Alloy

Fatigue-Resistant

Built to Last

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
23ISMON1EMO2627US

Specifications

Brand
PHILTOP
Items Included
1x Rear Transmission Mount - A5374 1x Front Transmission Mount - A3081 1x Front Right Engine Mount - A5385
Position
Front, Rear, Right
Quantity
3
Material
Aluminium Alloy&Iron
Warranty Period
2-Year
Part Number
A5374,A3081,A5385

Highlights

  • (Vehicle Fitment)PHILTOP Engine Mount Transmission Mount Kit Fit for 2005-2010 Cobalt 2.2L, for 2006-2011 HHR, for 2005-2006 Ion 2.2L, for 2007-2009 G5, for 2006 2008 Cobalt 2.4L, for 2006-2007 Ion 2.4L
  • (OEM Number)A3081, A5374, A5385, 15926983, 25973863, 22693268, 25973870, 22722617, 22731274, 15940092, 22693271, 15939383, 25974059, 25827846
  • (Package Included)1x Rear Transmission Mount (A5374),1x Front Transmission Mount (A3081), 1x Front Right Engine Mount (A5385).Please use Philtop's Your Garage feature above to see if this part is compatible with your vehicle.
  • (High Performance)The engine mounts are made of natural rubber and metal materials, adapting to cold, high temperature and extreme environment of the engine compartment. Improve NVH performance, reduce high-frequency vibration 20-200Hz, reduce vehicle vibration amplitude by about 70%, and reduce cockpit noise by 5-10 db, able to withstand extreme environments of -40℃ and 120℃.
  • (Installation Instructions): 1. Align all bolts; 2. Gently screw the bolts into the holes; 3. Tighten all bolts simultaneously(Do not tighten them one by one). The heat shield can be bent for easy installation, but be sure to clean the adhesive in the installation area before installation and restore any bent areas from disassembly to a flat state.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200520102005 - 20102005 - 20102006 - 20072006 - 200720082006 - 20112007 - 20112006 - 20112006 - 20112007 - 20102007 - 20102008 - 201020092007 - 200920092007 - 200820052005 - 20062005 - 20062006 - 2007
MakeChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletPontiacPontiacPontiacSaturnSaturnSaturnSaturn
ModelCobaltCobaltCobaltCobaltCobaltCobaltCobaltHHRHHRHHRHHRHHRHHRHHRHHRG5G5G5IonIonIonIon
TrimBaseBaseLSLTLTZSSSportLSLS PanelLTLTLT PanelLT PanelSSSS PanelBaseGTGT1233
Engine2.2L L42.2L L42.2L L42.2L L42.2L L42.4L L42.4L L42.2L L42.2L L42.2L L42.4L L42.2L L42.4L L42.0L L42.0L L42.2L L42.2L L42.4L L42.2L L42.2L L42.2L L42.4L L4
Note----------------------

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

PHILTOP ENGINE MOUNTEngine MOTOR MOUNT

Reviews

4.9/5

Based on 38 reviews

589%
48%
33%
20%
10%

Customer photos and videos

Thomas Kitz

02/27/2024

Verified buyer

I am in the process of doing a transmission swap on a Toyota Matrix and from past experience I wanted a new set of motor mounts. These appear to be of good quality and sure look like the factory parts minus the rust that the old ones are presenting. Recommended parts.

Alexus

05/21/2025

Verified buyer

I bought this only needing the one mount but this whole set was cheaper than any parts store near me so the extra mounts are a bonus but won’t be installing them just yet. The square shaped motor mount fit my 2008 Mazda 3 hatchback like factory. Didn’t take 30 mins to do. My car rides smooth now no more vibration or sluggish acceleration even with ac on full blast. Feels like a brand new car. I couldn’t be happier!

FAQS

No FAQs have been added for this product yet.