2004-2008 Acura TL 3.2L V6 | 3x Engine Mount | EM9247 - PHILTOP

2004-2008 Acura TL 3.2L V6 | 3x Engine Mount | EM9247 - PHILTOP

Fatigue-Resistant

Built to Last

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
32ISMON1EMO2407US

Specifications

Brand
PHILTOP
Items Included
1 X Front Motor Mount - A4526HY 1 X Front Right Motor Mount - A4517 1 X Front Upper Transmission Mount - A4544
Position
Front, Right
Quantity
3
Material
Rubber&Iron
Warranty Period
2-Year
Part Number
EM9247,EM9297,EM9220

Highlights

  • (Vehicle Fitment)PHILTOP Engine Motor Mount for 2003-2007 Accord 3.0L, for 2004-2006 TL, for 2007-2008 TL 3.5L
  • (OEM Number)EM9220, 50870SDBA02, 50870SEPA01, 50870SBDA02, EM9247, 50830SDAA02, 50830SDBA04, 50830SDBA02, 50830SDAA04, 50830SHJ305, 50830SEPA21, 50830SDBA21, 50830SHJA01, 50830SEPA01, EM9297, 50820SDAA01, 50820SDBA01, 50820SEAE01, 50820SEPA21, 50820SEPA03
  • (Package Included)1 x Front Motor Mount+A4526HY, 1 x Front Right Motor Mount+A4517,1 x Front Upper Transmission Mount+A4544. PHILTOP engine mounts adopt a modular design that can adapt to different engine layouts and achieve seamless installation.
  • (High Performance)The engine mounts are made of natural rubber and metal materials, adapting to cold, high temperature and extreme environment of the engine compartment. Improve NVH performance, reduce high-frequency vibration 20-200Hz, reduce vehicle vibration amplitude by about 70%, and reduce cockpit noise by 5-10 db, able to withstand extreme environments of -40℃ and 120℃.
  • (Installation Instructions): 1. Align all bolts; 2. Gently screw the bolts into the holes; 3. Tighten all bolts simultaneously(Do not tighten them one by one). The heat shield can be bent for easy installation, but be sure to clean the adhesive in the installation area before installation and restore any bent areas from disassembly to a flat state.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 20062007 - 20082003 - 2005200620072007200520062003 - 2005200620072005
MakeAcuraAcuraHondaHondaHondaHondaHondaHondaHondaHondaHondaHonda
ModelTLTLAccordAccordAccordAccordAccordAccordAccordAccordAccordAccord
TrimBaseType-SEXEXEXEX-LHybridHybridLXLXLXSE
Engine3.2L V63.5L V63.0L V63.0L V63.0L V63.0L V63.0L V63.0L V63.0L V63.0L V63.0L V63.0L V6
Note
Automatic trans.Manual trans.;Front;Right;Upper
Automatic trans.Manual trans.;Front;Right;Upper
Automatic trans.;Front;Front Upper;Hydraulic Mount;Right
Automatic trans.;Front;Right;Upper
--
Automatic trans.;Front;Front Upper;Hydraulic Mount;Right
Automatic trans.;Front;Right;Upper
Automatic trans.;Front;Front Upper;Hydraulic Mount;Right
Automatic trans.;Front;Right;Upper
-
Automatic trans.;Front;Front Upper;Hydraulic Mount;Right

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

PHILTOP ENGINE MOUNTEngine MOTOR MOUNT

Reviews

4.5/5

Based on 11 reviews

555%
436%
39%
20%
10%

Tom_Handy_352

03/03/2026

These look really well-made and feel heavy duty. For the price of three, it's an absolute steal. Saved me a ton of cash compared to buying just one from the dealership.

Amanda_MomOfThree_189

01/21/2026

Arrived faster than expected and was packed securely. Had a question about the fitment and customer service was super helpful and solved it right away.

FAQS

No FAQs have been added for this product yet.