2009-2013 Honda Fit 1.5L L4 | 3x Engine Mount | A65012 - PHILTOP

2009-2013 Honda Fit 1.5L L4 | 3x Engine Mount | A65012 - PHILTOP

Fatigue-Resistant

Built to Last

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
53ISEMO0297US

Specifications

Brand
PHILTOP
Items Included
1x Transmission Mount - EM5891 1x Front Engine Mount - EM9602 1x Rear Motor Mount- EM9533
Position
Front, Rear
Quantity
3
Material
Rubber&Iron
Warranty Period
2-Year
Part Number
A65012,9602,10031,EM5891

Highlights

  • [Vehicle Fitment]: PHILTOP Engine Motor Mount for 2009-2012 Honda Fit, 2013 Honda Fit 1.5L
  • [OEM Number]: 9602、A65012、9533、96028、50850TK6981
  • [Package Included]: 1x Transmission Mount - EM5891, 1x Front Engine Mount - EM9602, 1x rear motor mount- EM9533
  • [Advantages]: The Engine Motor Mount is designed and developed according to the original part structure, using outstanding materials - natural rubber and metal, which significantly improves the durability of the engine bracket and extends the product life.
  • [Benefits]: The modular design of the Engine Motor Mount can adapt to different layouts, absorb the high-frequency vibration of the engine, reduce the vibration amplitude, significantly reduce the cockpit noise, and improve NVH.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20132009 - 2013
MakeHondaHonda
ModelFitFit
TrimBaseSport
Engine1.5L L41.5L L4
Note
Automatic trans.Forte Base Model, to 2/18/2013 HYDRAULIC, TOP BOLT REQUIRED: M14x1.50- 35MM
Automatic trans.Forte Base Model, to 2/18/2013 HYDRAULIC, TOP BOLT REQUIRED: M14x1.50- 35MM

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

Reviews

4.6/5

Based on 5 reviews

580%
40%
320%
20%
10%

Tony

07/27/2026

Verified buyer

Perfect

Jason_Trucks_113

10/10/2025

These were surprisingly easy to install. I'm not a mechanic by any stretch, but I got them in without too much trouble. They feel way better than my old worn-out ones. Much smoother ride now.

FAQS

No FAQs have been added for this product yet.