(Longer Lifespan) PHILTOP automotive replacement spark plugs are made of double iridium, with excellent durability, heat and corrosion resistance, effectively burns off the carbon deposits on the plug tip, extending the service life.
(Faster Starts)The double iridium spark plugs can realize the center electrode pole refinement and concentrates spark energy, providing better ignitibility for vehicles and smoother environment for engine, no worry for misfire.
(Fuel Economy) 1.1mm fine wire iridium center wire tip design for sufficient combustion, efficiently reducing carbon accumulation. The external sealing gasket can prevent combustion gas leakage and relief fuel consumption.
P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.
Checks Before Installation
Confirm the ignition coils and spark plugs match the vehicle and original parts.
Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
Check the spark-plug wells for oil, carbon deposits or debris.
Allow the engine to cool completely before removing the spark plugs.
Confirm the specified spark-plug gap and installation torque in the vehicle service manual.
Installation Steps
Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.
Spark Plug Torque Reference
Spark Plug Thread
Recommended Torque
18 mm (M18)
35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)
25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)
15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)
10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)
8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket
10–20 N·m (7.4–14.8 lb-ft)
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.
After Installation
Clear historical fault codes with an OBD-II scanner.
Start the engine and let it idle for several minutes.
Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
Check that the malfunction indicator light remains off.
Perform a short road test, then rescan for returned fault codes.
Product Video
Product Description
Reviews
4.8/5
Based on 46 reviews
5
80%
4
17%
3
2%
2
0%
1
0%
Customer photos and videos
S
STEEL5757
02/06/2026
Verified buyer
I ordered these PHILTOP Spark Plugs set of 4 for our family car which is a Honda Accord Ex 2007. There is a noticeable running difference since putting in these new plugs. Gap was nearly on point, 0.044 inches. From the threads to the electrodes, these (4) plugs look great! Quality build and precise workmanship. Easy to install of course. Seats perfectly well after install. No leaks nor thread issues. Car starts quickly. Idles and runs smoothly. No issues noted. Recommended for its price and performance.
S
STEEL5757
06/19/2023
Verified buyer
PHILTOP Spark Plugs pack of 4 are a Perfect fit for our Honda Accord EX 2007 4-door sedan. Gapped and torqued, these plugs made of double iridium, went in nice, smooth and easy. Engine start ups good and seems to have a good performance. No misfires! Recommended.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
(Longer Lifespan) PHILTOP automotive replacement spark plugs are made of double iridium, with excellent durability, heat and corrosion resistance, effectively burns off the carbon deposits on the plug tip, extending the service life.
(Faster Starts)The double iridium spark plugs can realize the center electrode pole refinement and concentrates spark energy, providing better ignitibility for vehicles and smoother environment for engine, no worry for misfire.
(Fuel Economy) 1.1mm fine wire iridium center wire tip design for sufficient combustion, efficiently reducing carbon accumulation. The external sealing gasket can prevent combustion gas leakage and relief fuel consumption.
P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.
Checks Before Installation
Confirm the ignition coils and spark plugs match the vehicle and original parts.
Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
Check the spark-plug wells for oil, carbon deposits or debris.
Allow the engine to cool completely before removing the spark plugs.
Confirm the specified spark-plug gap and installation torque in the vehicle service manual.
Installation Steps
Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.
Spark Plug Torque Reference
Spark Plug Thread
Recommended Torque
18 mm (M18)
35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)
25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)
15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)
10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)
8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket
10–20 N·m (7.4–14.8 lb-ft)
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.
After Installation
Clear historical fault codes with an OBD-II scanner.
Start the engine and let it idle for several minutes.
Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
Check that the malfunction indicator light remains off.
Perform a short road test, then rescan for returned fault codes.
Product Video
Product Description
Reviews
4.8/5
Based on 46 reviews
5
80%
4
17%
3
2%
2
0%
1
0%
Customer photos and videos
S
STEEL5757
Feb 06,2026
Verified buyer
I ordered these PHILTOP Spark Plugs set of 4 for our family car which is a Honda Accord Ex 2007. There is a noticeable running difference since putting in these new plugs. Gap was nearly on point, 0.044 inches. From the threads to the electrodes, these (4) plugs look great! Quality build and precise workmanship. Easy to install of course. Seats perfectly well after install. No leaks nor thread issues. Car starts quickly. Idles and runs smoothly. No issues noted. Recommended for its price and performance.
S
STEEL5757
Jun 19,2023
Verified buyer
PHILTOP Spark Plugs pack of 4 are a Perfect fit for our Honda Accord EX 2007 4-door sedan. Gapped and torqued, these plugs made of double iridium, went in nice, smooth and easy. Engine start ups good and seems to have a good performance. No misfires! Recommended.