2010-2012 Mazda 3 2.5L | 4x Aluminum Alloy Engine Mount | A4405 - PHILTOP

2010-2012 Mazda 3 2.5L | 4x Aluminum Alloy Engine Mount | A4405 - PHILTOP

Aluminum Alloy

Fatigue-Resistant

Built to Last

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
42ISMON1EMO3847US

Specifications

Brand
PHILTOP
Items Included
1x Front Right Motor Mount - A4444 1x Rear Motor Mount - A4405 1x Rear Torque Strut Mount - A4418 1x Left Transmission Mount - A4421
Position
Front, Rear, Right, Left
Quantity
4
Material
Aluminium Alloy&Iron
Warranty Period
2-Year
Part Number
A4405,A4421,A4444

Highlights

  • (Vehicle Fitment)PHILTOP Engine Motor Mount Compatible vehicle: 2010-2013 3 2.5L, 2012-2015 5
  • (OEM Number)A4405, A4421, A4444, A4418, B37F39040F, BBN339040A, BBN339040, BFD139070B, BBN339060A, BP4S39040B, BP4S39040A, BP4S39040, BBM539070C, BBM539070B
  • (Package Included)1x Front Right Motor Mount A4444, 1x Rear Motor Mount A4405, 1x Rear Torque Strut Mount A4418, 1x Left Transmission Mount A4421.
  • (High Performance)The engine mounts are made of natural rubber and metal materials, adapting to cold, high temperature and extreme environment of the engine compartment. Improve NVH performance, reduce high-frequency vibration 20-200Hz, reduce vehicle vibration amplitude by about 70%, and reduce cockpit noise by 5-10 db, able to withstand extreme environments of -40℃ and 120℃.
  • (Installation Instructions): 1. Align all bolts; 2. Gently screw the bolts into the holes; 3. Tighten all bolts simultaneously(Do not tighten them one by one). The heat shield can be bent for easy installation, but be sure to clean the adhesive in the installation area before installation and restore any bent areas from disassembly to a flat state.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 201120122012 - 20152012 - 20152012 - 2015
MakeMazdaMazdaMazdaMazdaMazda
Model33555
TrimSSGrand TouringSportTouring
Engine2.5L L42.5L L42.5L L42.5L L42.5L L4
Note
Rear 3 Base Model Rear 3 Base Model Solid 3 Base Model Front Right
Rear Rear Solid Front Right
Rear Rear Solid Front Right
Rear Rear Solid Front Right
Rear Rear Solid Front Right

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Amanda_MomOfThree_632

06/06/2026

Shipped out fast and got here in great condition. The packaging was solid. Customer support was helpful and responsive. A good buying experience.

DIY_Karen_619

12/09/2025

Installation was a lot easier than I expected. They fit without any fuss, which is a big plus compared to other brands. Very pleased with the straightforward installation.

FAQS

No FAQs have been added for this product yet.