2006-2008 Toyota RAV4 2.4L L4 | 4x Aluminum Alloy Engine Mount | OE#A62012 - PHILTOP

2006-2008 Toyota RAV4 2.4L L4 | 4x Aluminum Alloy Engine Mount | OE#A62012 - PHILTOP

Aluminum Alloy

Fatigue-Resistant

Built to Last

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
57ISMON1EMO2987US

Specifications

Brand
PHILTOP
Items Included
1x Front Motor Mount - A62012 1x Front Right Motor Mount - A62049HY 1x Rear Motor Mount - A62050 1x Transmission Mount - A62064
Position
Front, Rear, Right
Quantity
4
Material
Aluminium Alloy&Iron
Warranty Period
2-Year
OE Number
A62012,A62049HY,A62050,A62064

Highlights

  • (Vehicle Fitment)Engine Motor Mount for 2006 2007 2008 RAV4 Toyota
  • (OEM Number) A62012, A62049HY, A62050, A62064
  • (Package Included)1x Front Motor Mount(A62012), 1x Front Right Motor Mount(A62049HY), 1x Rear Motor Mount(A62050), 1x Transmission Mount(A62064).
  • (High Performance)The engine mounts are made of natural rubber and metal materials, adapting to cold, high temperature and extreme environment of the engine compartment. Improve NVH performance, reduce high-frequency vibration 20-200Hz, reduce vehicle vibration amplitude by about 70%, and reduce cockpit noise by 5-10 db, able to withstand extreme environments of -40℃ and 120℃.
  • (Installation Instructions): 1. Align all bolts; 2. Gently screw the bolts into the holes; 3. Tighten all bolts simultaneously(Do not tighten them one by one). The heat shield can be bent for easy installation, but be sure to clean the adhesive in the installation area before installation and restore any bent areas from disassembly to a flat state.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2006 - 20082006 - 20082006 - 2008
MakeToyotaToyotaToyota
ModelRAV4RAV4RAV4
TrimBaseLimitedSport
Engine2.4L L42.4L L42.4L L4
Note---

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

Reviews

4.9/5

Based on 7 reviews

586%
414%
30%
20%
10%

Darrius Morgan

02/23/2025

Verified buyer

This product is equivalent to an OEM set! This fit in perfect with no problems, and it holds the engine still! It's way cheaper than buying from the store!

Brad_AutoParts_360

12/19/2025

Super fast shipping and the parts were well protected. Had a question and customer service answered immediately. Couldn't ask for a better experience.

FAQS

No FAQs have been added for this product yet.