2001-2004 Toyota Tacoma | Vacuum Brake Booster w/Push Rod Adjustment Tool | 4461004100/534905 - PHILTOP

2001-2004 Toyota Tacoma | Vacuum Brake Booster w/Push Rod Adjustment Tool | 4461004100/534905 - PHILTOP

Vacuum Brake Booster

Push Rod Adjustment Tool Included

Responsive Braking Assist

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
19ISBEB0467US

Specifications

Brand
PHILTOP
Booster Type
Vacuum
Master Cylinder Stud Thread Size
M8x1.25
Diaphragm Diameter
10.445 in
Diaphragm Type
Single
Housing Diameter
10.735 in
Housing Material
Steel
Warranty Period
2-Year
OE Number
4461004100,4461004101,4461004110,4461004111
Part Number
534905

Highlights

  • [Part Numbers]: 534905, 4461004100, 4461004101, 4461004110, 4461004111. Our brake booster serves as a seamless replacement for original equipment, ensuring a precise fit for exceptional performance
  • [Fitment]: Compatible for Toyota 2001-2004 Tacoma(From 09/2000)
  • [Specification]: ①Brake Booster Diaphragm Style: Single, ②Diaphragm Diameter: 265.3(MM)/10.445(IN), ③Master Cylinder Stud Thread Size: M8x1.25, ④Stud Thread Size: M8x1.25, ⑤Material: Steel, ⑥Master Cylinder Included: no
  • [High Quality]: Manufactured to OE standards and fully tested for fit, corrosion resistance, and durability to ensure consistent braking performance and long-term reliability
  • [Worry-Free protection]: Covered by a 1-year unlimited-mileage protection, this brake booster is designed for reliable performance. If you receive a damaged part, experience a fitment issue, or encounter any defect, our support team will help you with a quick and hassle-free resolution

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20012002 - 200420012002 - 200420012002 - 200420012002 - 200420012002 - 200420012002 - 2004
MakeToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacoma
TrimBaseBaseBaseBaseBaseBasePre RunnerPre RunnerPre RunnerPre RunnerS-RunnerS-Runner
Engine2.4L L42.4L L42.7L L42.7L L43.4L V63.4L V62.7L L42.7L L43.4L V63.4L V63.4L V63.4L V6
Note
From 09/2000;without Master Cylinder
without Master Cylinder
From 09/2000;without Master Cylinder
without Master Cylinder
From 09/2000;without Master Cylinder
without Master Cylinder
From 09/2000;without Master Cylinder
without Master Cylinder
From 09/2000;without Master Cylinder
without Master Cylinder
From 09/2000;without Master Cylinder
without Master Cylinder

How to Use the Push Rod Adjustment Tool?

Installation Manual Download

User manual (PDF)
Download
  • Step-1: Measure the Master Cylinder Depth: Place the tool against the master cylinder mounting surface. Extend the center gauge pin until it touches the bottom of the master cylinder piston recess, then lock the setting.
  • Step-2: Check the Booster Push Rod: Without changing the tool setting, place it against the brake booster mounting surface and compare the gauge position with the push rod tip.
  • Step-3: Verify the Clearance: The push rod must match the clearance specified in the vehicle service manual:
    • Too short: excessive pedal travel and reduced braking response.
    • Too long: constant pressure on the master cylinder, brake drag or overheating.
  • Step-4: Adjust Only When Required: Adjust the push rod only if the vehicle service manual permits it. Tighten the locknut and measure again after adjustment.
  • Step-5: Confirm Proper Fit: The master cylinder must sit flush against the booster without force. The push rod must not preload the master cylinder piston.

Important

  • Do not estimate the push rod length by eye.
  • Do not change the factory setting unless measurement confirms adjustment is required.
  • Use the vehicle manufacturer’s specified clearance; the correct value varies by vehicle.
  • Never force the master cylinder onto the booster to overcome incorrect push rod length.
  • Recheck the measurement after every adjustment.

Product Description

12

Reviews

4.6/5

Based on 7 reviews

571%
414%
314%
20%
10%

Rob_HomeGarage_621

10/21/2025

Installed this brake booster on my 2002 Tacoma and it fit like a glove. No modifications needed at all. It was a much better experience than trying to make a universal part fit.

Lisa_CivicDriver_894

04/30/2026

This brake booster is a solid part and the price is unbeatable. My Tacoma feels much safer to drive now with reliable braking. Definitely a good purchase.

FAQS

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

2001-2004 Toyota Tacoma Brake Booster Vacuum w/Push Rod Adjustment Tool | 4461004100 | PHILTOP