Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

2007-2012 Nissan Sentra 2.0L/2.5L L4 | Vacuum Brake Booster w/Push Rod Adjustment Tool | OE#47210ET000/534938 - PHILTOP
Vacuum Brake Booster
Push Rod Adjustment Tool Included
Responsive Braking Assist
Check if this fits your vehicle
Select a vehicle to check this product.
- SKU:
- 79ISBEB0697US
Specifications
Highlights
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
| Year | 2007 - 2012 | 2007 - 2012 | 2007 - 2012 | 2007 - 2012 | 2007 - 2012 | 2009 - 2012 |
|---|---|---|---|---|---|---|
| Make | Nissan | Nissan | Nissan | Nissan | Nissan | Nissan |
| Model | Sentra | Sentra | Sentra | Sentra | Sentra | Sentra |
| Trim | Base | S | SE-R | SE-R Spec V | SL | SR |
| Engine | 2.0L L4 | 2.0L L4 | 2.5L L4 | 2.5L L4 | 2.0L L4 | 2.0L L4 |
| Note | without Master Cylinder | without Master Cylinder | without Master Cylinder | without Master Cylinder | without Master Cylinder | without Master Cylinder |
How to Use the Push Rod Adjustment Tool?
Installation Manual Download
- Step-1: Measure the Master Cylinder Depth: Place the tool against the master cylinder mounting surface. Extend the center gauge pin until it touches the bottom of the master cylinder piston recess, then lock the setting.
- Step-2: Check the Booster Push Rod: Without changing the tool setting, place it against the brake booster mounting surface and compare the gauge position with the push rod tip.
- Step-3: Verify the Clearance: The push rod must match the clearance specified in the vehicle service manual:
- Too short: excessive pedal travel and reduced braking response.
- Too long: constant pressure on the master cylinder, brake drag or overheating.
- Step-4: Adjust Only When Required: Adjust the push rod only if the vehicle service manual permits it. Tighten the locknut and measure again after adjustment.
- Step-5: Confirm Proper Fit: The master cylinder must sit flush against the booster without force. The push rod must not preload the master cylinder piston.
Important
- Do not estimate the push rod length by eye.
- Do not change the factory setting unless measurement confirms adjustment is required.
- Use the vehicle manufacturer’s specified clearance; the correct value varies by vehicle.
- Never force the master cylinder onto the booster to overcome incorrect push rod length.
- Recheck the measurement after every adjustment.
Product Description


Reviews
0.0/5
Based on 0 reviews
No reviews match these filters.
FAQS
Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.
Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.
Add your vehicle to ensure fitment
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2007-2012 Nissan Sentra 2.0L/2.5L L4 | Vacuum Brake Booster w/Push Rod Adjustment Tool | OE#47210ET000/534938 - PHILTOP
Vacuum Brake Booster
Push Rod Adjustment Tool Included
Responsive Braking Assist
- SKU:
- 79ISBEB0697US
Check if this fits your vehicle
Select a vehicle to check this product.
- Booster Type
- Vacuum
- Master Cylinder Stud Thread Size
- M8x1.25
- Diaphragm Diameter
- 11.498 in
- Diaphragm Type
- Single
- Housing Diameter
- 11.687 in
- Housing Material
- Steel
- Warranty Period
- 2-Year
- [Part Numbers]: 534938, 47210ET000, 47210ET00A. Our brake booster serves as a seamless replacement for original equipment, ensuring a precise fit for exceptional performance
- [Fitment]: Compatible for Nissan 2007-2012 Sentra (without Master Cylinder)
- [Specification]: ①Brake Booster Diaphragm Style: Single, ②Diaphragm Diameter: 11.498(IN)/292.05(MM), ③Master Cylinder Stud Thread Size: M8x1.25, ④Stud Thread Size: M8x1.25, ⑤Material: Steel, ⑥Master Cylinder Included: no
- [High Quality]: Manufactured to OE standards and fully tested for fit, corrosion resistance, and durability to ensure consistent braking performance and long-term reliability
- [Worry-Free protection]: Covered by a 24-month unlimited-mileage protection, this brake booster is designed for reliable performance. If you receive a damaged part, experience a fitment issue, or encounter any defect, our support team will help you with a quick and hassle-free resolution
0 reviews
Compatible Vehicles
Check if this fits your vehicle
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 2007 - 2012 | Nissan | Sentra | Base | 2.0L L4 | without Master Cylinder |
| 2007 - 2012 | Nissan | Sentra | S | 2.0L L4 | without Master Cylinder |
| 2007 - 2012 | Nissan | Sentra | SE-R | 2.5L L4 | without Master Cylinder |
| 2007 - 2012 | Nissan | Sentra | SE-R Spec V | 2.5L L4 | without Master Cylinder |
| 2007 - 2012 | Nissan | Sentra | SL | 2.0L L4 | without Master Cylinder |
| 2009 - 2012 | Nissan | Sentra | SR | 2.0L L4 | without Master Cylinder |
Product Specifications
- Brand
- PHILTOP
- Booster Type
- Vacuum
- Master Cylinder Stud Thread Size
- M8x1.25
- Diaphragm Diameter
- 11.498 in
- Diaphragm Type
- Single
- Housing Diameter
- 11.687 in
- Housing Material
- Steel
- Warranty Period
- 2-Year
- OE Number
- 47210ET000,47210ET00A
- Part Number
- 534938
How to Use the Push Rod Adjustment Tool?
Installation Manual Download
- Step-1: Measure the Master Cylinder Depth: Place the tool against the master cylinder mounting surface. Extend the center gauge pin until it touches the bottom of the master cylinder piston recess, then lock the setting.
- Step-2: Check the Booster Push Rod: Without changing the tool setting, place it against the brake booster mounting surface and compare the gauge position with the push rod tip.
- Step-3: Verify the Clearance: The push rod must match the clearance specified in the vehicle service manual:
- Too short: excessive pedal travel and reduced braking response.
- Too long: constant pressure on the master cylinder, brake drag or overheating.
- Step-4: Adjust Only When Required: Adjust the push rod only if the vehicle service manual permits it. Tighten the locknut and measure again after adjustment.
- Step-5: Confirm Proper Fit: The master cylinder must sit flush against the booster without force. The push rod must not preload the master cylinder piston.
Important
- Do not estimate the push rod length by eye.
- Do not change the factory setting unless measurement confirms adjustment is required.
- Use the vehicle manufacturer’s specified clearance; the correct value varies by vehicle.
- Never force the master cylinder onto the booster to overcome incorrect push rod length.
- Recheck the measurement after every adjustment.
Product Description


Reviews
0.0/5
Based on 0 reviews
No reviews match these filters.
FAQS
Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.
Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.
Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.