2000-2004 Nissan Xterra 3.3L | Vacuum Brake Booster w/Push Rod Adjustment Tool | OE#472107B400/536006 - PHILTOP

2000-2004 Nissan Xterra 3.3L | Vacuum Brake Booster w/Push Rod Adjustment Tool | OE#472107B400/536006 - PHILTOP

Vacuum Brake Booster

Push Rod Adjustment Tool Included

Responsive Braking Assist

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
24ISBEB0177US

Specifications

Brand
PHILTOP
Booster Type
Vacuum
Master Cylinder Stud Thread Size
M8x1.25
Diaphragm Diameter
9.22 in
Diaphragm Type
Dual
Housing Diameter
9.72 in
Housing Material
Steel
Warranty Period
2-Year
OE Number
472107B400
Part Number
536006

Highlights

  • [Part Numbers]: 536006, 472107B400, BBK20146. Our vacuum brake booster NOT for Hydro-Boost. Fits vacuum brake systems with a large black round canister. Check behind the master cylinder before ordering
  • [Fitment]: For Nissan 2000-2001 Xterra 3.3L. For Nissan 2002-2004 Xterra (From 02/2002). For 2000-2004 Frontier 3.3L ( without Vehicle Stability Control)(without Vehicle Stability Control)
  • [Specification]: ①Brake Booster Diaphragm Style: Dual, ②Diaphragm Diameter: 9.22(IN)/234.19(MM), ③Master Cylinder Stud Thread Size: M8x1.25, ④Stud Thread Size: M8x1.25, ⑤Material: Steel, ⑥Master Cylinder Included: no
  • [High Quality]: Manufactured to OE standards and fully tested for fit, corrosion resistance, and durability to ensure consistent braking performance and long-term reliability
  • [Worry-Free protection]: Covered by a 24-month unlimited-mileage protection, this brake booster is designed for reliable performance. If you receive a damaged part, experience a fitment issue, or encounter any defect, our support team will help you with a quick and hassle-free resolution

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200420012002 - 20042000 - 20012002 - 20032002 - 20042000 - 20012002 - 20042000 - 200120022003 - 200420022003 - 20042000 - 200120022003 - 2004
MakeNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissanNissan
ModelFrontierFrontierFrontierFrontierFrontierFrontierFrontierFrontierXterraXterraXterraXterraXterraXterraXterraXterra
TrimLESCSCSESESVEXEXESESESEXEXEXEXEXE
Engine3.3L V63.3L V63.3L V63.3L V63.3L V63.3L V63.3L V63.3L V63.3L V63.3L V63.3L V62.4L L42.4L L43.3L V63.3L V63.3L V6
Note
without Master Cylinder;without Vehicle Stability Control (VSC)
without Master Cylinder
without Master Cylinder;without Vehicle Stability Control (VSC)
without Master Cylinder
without Master Cylinder;without Vehicle Stability Control (VSC)
without Master Cylinder;without Vehicle Stability Control (VSC)
without Master Cylinder
without Master Cylinder;without Vehicle Stability Control (VSC)
without Master Cylinder
From 02/2002;without Master Cylinder
without Master Cylinder;without Vehicle Stability Control (VSC)
From 02/2002;without Master Cylinder
without Master Cylinder;without Vehicle Stability Control (VSC)
without Master Cylinder
From 02/2002;without Master Cylinder
without Master Cylinder;without Vehicle Stability Control (VSC)

How to Use the Push Rod Adjustment Tool?

Installation Manual Download

User manual (PDF)
Download
  • Step-1: Measure the Master Cylinder Depth: Place the tool against the master cylinder mounting surface. Extend the center gauge pin until it touches the bottom of the master cylinder piston recess, then lock the setting.
  • Step-2: Check the Booster Push Rod: Without changing the tool setting, place it against the brake booster mounting surface and compare the gauge position with the push rod tip.
  • Step-3: Verify the Clearance: The push rod must match the clearance specified in the vehicle service manual:
    • Too short: excessive pedal travel and reduced braking response.
    • Too long: constant pressure on the master cylinder, brake drag or overheating.
  • Step-4: Adjust Only When Required: Adjust the push rod only if the vehicle service manual permits it. Tighten the locknut and measure again after adjustment.
  • Step-5: Confirm Proper Fit: The master cylinder must sit flush against the booster without force. The push rod must not preload the master cylinder piston.

Important

  • Do not estimate the push rod length by eye.
  • Do not change the factory setting unless measurement confirms adjustment is required.
  • Use the vehicle manufacturer’s specified clearance; the correct value varies by vehicle.
  • Never force the master cylinder onto the booster to overcome incorrect push rod length.
  • Recheck the measurement after every adjustment.

Product Description

12

Reviews

5.0/5

Based on 1 review

5100%
40%
30%
20%
10%

Edgar Picado Gómez

07/22/2026

Verified buyer

Excelente

FAQS

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

2000-2004 Nissan Xterra Vacuum Brake Booster w/Push Rod Adjustment Tool | 472107B400 | PHILTOP