2007-2009 Toyota FJ Cruiser 4.0L V6 | 8 PC Front Upper、Lower Control Arm | OE#4950339265/ES80378 - PHILTOP

2007-2009 Toyota FJ Cruiser 4.0L V6 | 8 PC Front Upper、Lower Control Arm | OE#4950339265/ES80378 - PHILTOP

Corrosion Resistant

Deformation Resistant

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
65ISOCA1067US

Specifications

Brand
PHILTOP
Items Included
1x Front Upper Control Arm Assembly - Driver Side - K620064 1x Front Upper Control Arm Assembly - Passenger Side - K620063 1x Front Lower Control Arm Assembly - Driver Side - K620062 1x Front Lower Control Arm Assembly - Passenger Side - K620061 1x Outer Tie Rod End - Driver Side - ES80378 1x Outer Tie Rod End - Passenger Side - ES80378 2x Inner Tie Rod Ends - EV80379
Quantity
8
Position
Front Upper、Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
4950339265,4863060050,4806860010,4806960010,4861060070,4863060040,4861060050,4863060020,4550339265,4550339235,4504639505
Part Number
ES80378,EV80379,RK620061,RK620062,RK620064,RK620063,TC3324,TC3325,TA2400,TA2352,CK620064,CK620063,GS86114,GS86115,CB74008PR,GES80378,JTC2498,GEV80379,JTC2499,TO74045XL,534962,TYA612,1018137

Highlights

  • Fitment: PHILTOP control arms suspension kit fit for Toyota 4Runner/FJ Cruiser/Lexus GX470 2003-2009. Please check fitment for accurate information before purchasing
  • Kit Includes: 2x Front Upper Control Arms Assembly, 2x Front Lower Control Arms Assembly, 2x Outer Tie Rod Ends, 2x Inner Tie Rod Ends
  • OE Number: Control Arms for K620064 K620063 K620062 K620061 ES80378 EV80379
  • Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20032004 - 20092003 - 20092003 - 20092003 - 20092003 - 20092003 - 20092003 - 20092007 - 200920072008
MakeLexusLexusToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelGX470GX4704Runner4Runner4Runner4Runner4Runner4RunnerFJ CruiserFJ CruiserFJ Cruiser
TrimBaseBaseLimitedLimitedSR5SR5SportSportBaseTRD Special EditionTrail Teams Special Edition
Engine4.7L V84.7L V84.0L V64.7L V84.0L V64.7L V84.0L V64.7L V84.0L V64.0L V64.0L V6
Note-
w/o Kinetic Dynamic Suspension
---------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Rob_HomeGarage_773

12/19/2025

Putting these on my 4Runner was pretty easy. Everything fit perfectly, no adjustments needed. They're definitely an upgrade from the old worn-out parts. Good quality kit.

RickFixIt_177

05/09/2026

These look really professional and well-made. For the price, the quality is outstanding. They've got a nice finish and feel very durable. Great value for my 4Runner.

FAQS

No FAQs have been added for this product yet.