(Longer Lifespan) PHILTOP automotive replacement spark plugs are made of double iridium, with excellent durability, heat and corrosion resistance, effectively burns off the carbon deposits on the plug tip, extending the service life.
(Faster Starts)The double iridium spark plugs can realize the center electrode pole refinement and concentrates spark energy, providing better ignitibility for vehicles and smoother environment for engine, no worry for misfire.
(Fuel Economy) 1.1mm fine wire iridium center wire tip design for sufficient combustion, efficiently reducing carbon accumulation. The external sealing gasket can prevent combustion gas leakage and relief fuel consumption.
P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.
Checks Before Installation
Confirm the ignition coils and spark plugs match the vehicle and original parts.
Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
Check the spark-plug wells for oil, carbon deposits or debris.
Allow the engine to cool completely before removing the spark plugs.
Confirm the specified spark-plug gap and installation torque in the vehicle service manual.
Installation Steps
Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.
Spark Plug Torque Reference
Spark Plug Thread
Recommended Torque
18 mm (M18)
35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)
25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)
15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)
10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)
8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket
10–20 N·m (7.4–14.8 lb-ft)
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.
After Installation
Clear historical fault codes with an OBD-II scanner.
Start the engine and let it idle for several minutes.
Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
Check that the malfunction indicator light remains off.
Perform a short road test, then rescan for returned fault codes.
Product Video
Product Description
Reviews
4.8/5
Based on 19 reviews
5
84%
4
11%
3
5%
2
0%
1
0%
Customer photos and videos
R
rockymtn
09/06/2026
Verified buyer
These plugs are a perfect fit for my 2013 Chevy Silverado 1500 with 5.3L engine. They installed easily, and my truck now runs better than it did before. The plugs appear well made and should last a long time. I recommend them for your vehicle if this is the correct size for you.
M
Mama Bear
08/28/2026
Verified buyer
This is a pack of 8 G power platinum spark plugs for Silverado, Tahoe, Sierra, Ranger, suburban and, Yiukon trucks. These are quality spark plugs that still perform smoothly during really hot or really cold temperatures. They are zinc plated, corrosion and rust resistant. These spark plugs provide strong ignition performance. These spark plugs are durable and worth the price.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
(Longer Lifespan) PHILTOP automotive replacement spark plugs are made of double iridium, with excellent durability, heat and corrosion resistance, effectively burns off the carbon deposits on the plug tip, extending the service life.
(Faster Starts)The double iridium spark plugs can realize the center electrode pole refinement and concentrates spark energy, providing better ignitibility for vehicles and smoother environment for engine, no worry for misfire.
(Fuel Economy) 1.1mm fine wire iridium center wire tip design for sufficient combustion, efficiently reducing carbon accumulation. The external sealing gasket can prevent combustion gas leakage and relief fuel consumption.
P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.
Checks Before Installation
Confirm the ignition coils and spark plugs match the vehicle and original parts.
Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
Check the spark-plug wells for oil, carbon deposits or debris.
Allow the engine to cool completely before removing the spark plugs.
Confirm the specified spark-plug gap and installation torque in the vehicle service manual.
Installation Steps
Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.
Spark Plug Torque Reference
Spark Plug Thread
Recommended Torque
18 mm (M18)
35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)
25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)
15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)
10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)
8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket
10–20 N·m (7.4–14.8 lb-ft)
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.
After Installation
Clear historical fault codes with an OBD-II scanner.
Start the engine and let it idle for several minutes.
Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
Check that the malfunction indicator light remains off.
Perform a short road test, then rescan for returned fault codes.
Product Video
Product Description
Reviews
4.8/5
Based on 19 reviews
5
84%
4
11%
3
5%
2
0%
1
0%
Customer photos and videos
R
rockymtn
Sep 06,2026
Verified buyer
These plugs are a perfect fit for my 2013 Chevy Silverado 1500 with 5.3L engine. They installed easily, and my truck now runs better than it did before. The plugs appear well made and should last a long time. I recommend them for your vehicle if this is the correct size for you.
M
Mama Bear
Aug 28,2026
Verified buyer
This is a pack of 8 G power platinum spark plugs for Silverado, Tahoe, Sierra, Ranger, suburban and, Yiukon trucks. These are quality spark plugs that still perform smoothly during really hot or really cold temperatures. They are zinc plated, corrosion and rust resistant. These spark plugs provide strong ignition performance. These spark plugs are durable and worth the price.