2012-2014 Honda CR-V | Front & Rear Shock Absorbers Struts w/Sway Bar link, w/Spring | OE#51611T0AA91/272491 - PHILTOP

2012-2014 Honda CR-V | Front & Rear Shock Absorbers Struts w/Sway Bar link, w/Spring | OE#51611T0AA91/272491 - PHILTOP

Front/Rear

Complete Strut Assembly & Shock Absorber Kit

4.2

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
32ISCSH0317US

Specifications

Brand
PHILTOP
Items Included
1x Front Strut W/Coil Spring Assembly - Driver Side - 272492 1x Front Strut W/Coil Spring Assembly - Passenger Side - 272491 1x Rear Strut W/Coil Spring Assembly - Driver Side - 172957L 1x Rear Strut W/Coil Spring Assembly - Passenger Side - 172957R 2x Front Stabilizer Sway Bars End Link - Driver & Passenger Side - K750297 1x Rear Stabilizer Sway Bar End Link - Passenger Side - K750151 1x Rear Stabilizer Sway Bar End Link - Driver Side - K750156
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut Assembly & Shock Absorber Kit
Quantity
8
Position
Front/Rear
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
OE Number
51611T0AA91,51621T0AA91,51605SXSA02,51605SWAA21,51605SXSA01,51606SXSA02,51605SWAA04,51621T0GA91,51606SXSA21,51621T0GA01,51606SWAA21,51605SXSA21,51606SWAA04,51606SXSA01,51611T0GA01,51611T0GA91,51611T0AA01,51621T0AA01
Part Number
272491,272492,172957L,172957R,282492,SR4432,SR4433,282491,G57479,G57480,G57602,G57601

Highlights

  • Struts Shock Absorbers Replacement for Honda CR-V 2012-2014.
  • Kit Includes:1x Front Strut w/Coil Spring Assembly - Driver Side - 272492 1x Front Strut w/Coil Spring Assembly - Passenger Side - 272491 1x Rear Strut w/Coil Spring Assembly - Driver Side - 172957L 1x Rear Strut w/Coil Spring Assembly - Passenger Side - 172957R 2x Front Stabilizer Sway Bars End Link - Driver & Passenger Side - K750297 1x Rear Stabilizer Sway Bar End Link - Passenger Side - K750151 1x Rear Stabilizer Sway Bar End Link - Driver Side - K750156.
  • Enhanced Driving Comfort & Stability:Professionally designed to restore your vehicle's ride comfort, this PHILTOP shock absorber set delivers superior damping performance, effectively reducing road noise and body vibrations while improving handling and overall driving stability. Enjoy a smoother, safer ride, regardless of road conditions.
  • Complete Ready-to-Install Unit: This all-in-one strut assembly comes pre-equipped with shock absorber, coil spring and mounting hardware for direct replacement. Fully pre-assembled design allows hassle-free installation without special tools or professional skills, making the whole mounting process quick and straightforward.
  • OE/OEM Part Number: G57601,51611T0AA91,51621T0AA91,51605SXSA02,51605SWAA21,51605SXSA01,51606SXSA02,51605SWAA04,51621T0GA91,51606SXSA21,51621T0GA01,51606SWAA21,51605SXSA21,51606SWAA04,51606SXSA01,51611T0GA01,51611T0GA91,51611T0AA01,51621T0AA01,172957L,172957R,G57479,G57480,282492,SR4432,SR4433,282491,272491,272492,G57602Before purchasing, please verify your vehicle's year, make, and model to ensure proper fit and compatibility.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20142012 - 20142012 - 2014
MakeHondaHondaHonda
ModelCR-VCR-VCR-V
TrimEXEX-LLX
Engine2.4L L42.4L L42.4L L4
Note
Recommended OE Application -Specific Replacement
Recommended OE Application -Specific Replacement
Recommended OE Application -Specific Replacement

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

1

Reviews

4.2/5

Based on 5 reviews

540%
440%
320%
20%
10%

Nancy_FirstCar_425

01/07/2026

The kit arrived sooner than I expected and was very well packaged. Customer service was awesome and answered my questions quickly.

Ashley_RoadTrip_990

05/17/2026

The kit arrived sooner than I expected and was very well packaged. Customer service was awesome and answered my questions quickly.

FAQS

No FAQs have been added for this product yet.