2007-2010 BMW X5 4.8L/4.4L | Front Drive Shaft | 938256 - PHILTOP

2007-2010 BMW X5 4.8L/4.4L | Front Drive Shaft | 938256 - PHILTOP

Front

Factory-Balanced

Corrosion-Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
46ISDSA1257US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Front
Fully Extended Length
27.76 in/705 mm
Fully Compressed Length
27.76 in/705 mm
Shaft Diameter
Φ40
Items Included
1x Drive Shaft - 938256
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
No
Universal Joint Size
φ25*64
Adjustable Length
No
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
938256

Highlights

  • (Vehicle Fitments)Fits for 2007-2010 BMW X5 4.8L, 2008-2010 BMW X6 4.4T, 2010 BMW X5 4.4T. Please check the product details and your vehicle information carefully before purchasing
  • (OE Certification)OE 938256, 26207556020
  • (Product Specs)①Installation Position: Front; ②Extended Shaft Length: 27.76 inch; ③Compressed Shaft Length: 27.76 inch; ④Shaft Material: Steel; ⑤Shaft Wall Thickness: 2 mm; ⑥Shaft Diameter: 40 mm; ⑦Length Adjustable: No; ⑧Installation Method: Flange Mounting; ⑨Universal Joint Spec: φ25*64; ⑩Flange Type: Square; ⑪Two-Piece Design: No
  • (Quality & Durability)Constructed with high-quality steel for reliable strength and long-lasting durability
  • (Noise-Free Operation)Engineered for smooth and quiet performance without abnormal noise

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2007 - 2008201020092010201020102008 - 20092010
MakeBMWBMWBMWBMWBMWBMWBMWBMW
ModelX5X5X5X5X6X6X6X6
Trim4.8iMxDrive48ixDrive48iActiveHybridMxDrive50ixDrive50i
Engine4.8L V84.4L V84.8L V84.8L V84.4L V84.4L V84.4L V84.4L V8
Note-
To 3/2010
-
To 3/2010
To 3/2010
To 3/2010
-
To 3/2010

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

5.0/5

Based on 1 review

5100%
40%
30%
20%
10%

A . G.

10/04/2026

Verified buyer

Fit & work fine.

FAQS

No FAQs have been added for this product yet.