2003-2005 Mazda 6 2.3L L4 | 3x Aluminum Alloy Engine Mounts | A6494 - PHILTOP

2003-2005 Mazda 6 2.3L L4 | 3x Aluminum Alloy Engine Mounts | A6494 - PHILTOP

Aluminum Alloy

Fatigue-Resistant

Built to Last

4.3

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
33ISMON1EMO3807US

Specifications

Brand
PHILTOP
Items Included
1x Front Right Motor Mount - A6494 1x Front Left Motor Mount - SKMA3907 1x Rear Torque Strut Mount - A6497
Position
Front, Rear, Right, Left
Quantity
3
Material
Aluminium Alloy&Iron
Warranty Period
2-Year
Part Number
A6494,SKMA3907,SKMA6494,EM9182

Highlights

  • Compatible with: Mazda 6 2003-2005 2.3L
  • OEM Quality: A6494,GK2E39060D,SKMA3907,GJ6A39070,A6497
  • Longer Product Life: Use of natural rubber and ST12 stamping material, adaptable to extreme environments from -40℃ to +120℃, and 40% longer Engine Mounts life
  • Noise Reduction: Absorbs high-frequency engine vibration (20-200Hz), reducing vibration transmitted to the body by 60%-80%, significantly improving driving comfort
  • Packing List: 1x Front Right Motor Mount+A6494, 1x Front Left Motor Mount+A5829, SAMA3907 1x Rear Torque Strut Mount+ A6497. Any questions about the product, please you contact my customer service

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 2005
MakeMazda
Model6
Trimi
Engine2.3L L4
Note
Front Right Rear Solid Front Left

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

PHILTOP ENGINE MOUNTTRANSMISSION MOUNT

Reviews

4.3/5

Based on 3 reviews

567%
40%
333%
20%
10%

Amanda_MomOfThree_20

01/06/2026

Installation was surprisingly straightforward. I've dealt with other brands where you have to wrestle them into place, but these slid right in. Saved me a lot of time and frustration compared to other mounts I've used.

Rob_HomeGarage_49

05/09/2026

Swapping these out was a breeze! Way easier than the last set I bought from another brand. Everything lined up perfectly, and it only took about an hour. Definitely recommend these if you're doing it yourself.

FAQS

No FAQs have been added for this product yet.