
2006-2013 Mazda 6 2.3L L4/2.5L L4 | Tensioner | OE#L3P915980C/38409 - PHILTOP
Quiet Operation
Slip Resistant
Corrosion & Heat-Resistant Housing
Check if this fits your vehicle
Select a vehicle to check this product.
- SKU:
- 50ISETB2487US
Specifications
Highlights
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
| Year | 2006 - 2008 | 2009 - 2013 |
|---|---|---|
| Make | Mazda | Mazda |
| Model | 6 | 6 |
| Trim | i | i |
| Engine | 2.3L L4 | 2.5L L4 |
| Note | - | - |
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
- Inspect the pulleys for binding, looseness or abnormal bearing noise.
- Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
- Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
- Disconnect the negative battery cable before installation.
Installation Steps
- Step-1: Photograph or record the belt-routing path before removing the belt.
- Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
- Step-3: Remove the belt and tensioner, then clean the mounting surface.
- Step-4: Position the new tensioner and tighten its mounting bolts to specification.
- Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
- Step-6: Slowly release the tensioner and recheck the complete belt path.
After Installation
- Confirm the tensioner bolts are secure and the belt is correctly seated.
- Start the engine and observe the belt tracking and tensioner movement.
- Check for belt slipping, jumping, lateral movement or abnormal noise.
- Confirm the alternator and all belt-driven accessories operate normally.
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2006-2013 Mazda 6 2.3L L4/2.5L L4 | Tensioner | OE#L3P915980C/38409 - PHILTOP
Quiet Operation
Slip Resistant
Corrosion & Heat-Resistant Housing
- SKU:
- 50ISETB2487US
$37.95
Check if this fits your vehicle
Select a vehicle to check this product.
- Pulley Included
- Yes
- Belt Included
- No
- Belt Type
- V-Ribbed
- Contact Surface
- V-Ribbed Grooved
- Pulley Outer Diameter
- 2.87 in
- Items Included
- 1x Engine Timing Belt Tensioner - 38409
- Quantity
- 1
- Warranty Period
- 2-Year
- [Fitment]: PHILTOP Belt Tensioner with Pulley Replacement For ① Mazda 6 2006-2008 2.3L, 2009-2013 2.5L
- [OE Reference Number]: LFG115980B, LFG115980C, L3P915980D, LFG115980A, L3P915980, L3P915980C, L3P915980B, L3P915980A, 38409, L50115940A, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
- [Labyrinth Seal Protection]: PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
- [Long service life]: The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
- [Strong stability]: Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension
0.0
0 reviews
Compatible Vehicles
Check if this fits your vehicle
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 2006 - 2008 | Mazda | 6 | i | 2.3L L4 | - |
| 2009 - 2013 | Mazda | 6 | i | 2.5L L4 | - |
Product Specifications
- Brand
- PHILTOP
- Pulley Included
- Yes
- Belt Included
- No
- Belt Type
- V-Ribbed
- Contact Surface
- V-Ribbed Grooved
- Pulley Outer Diameter
- 2.87 in
- Items Included
- 1x Engine Timing Belt Tensioner - 38409
- Quantity
- 1
- Warranty Period
- 2-Year
- OE Number
- L3P915980C,L3P915980B,L3P915980A
- Part Number
- 38409
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
- Inspect the pulleys for binding, looseness or abnormal bearing noise.
- Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
- Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
- Disconnect the negative battery cable before installation.
Installation Steps
- Step-1: Photograph or record the belt-routing path before removing the belt.
- Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
- Step-3: Remove the belt and tensioner, then clean the mounting surface.
- Step-4: Position the new tensioner and tighten its mounting bolts to specification.
- Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
- Step-6: Slowly release the tensioner and recheck the complete belt path.
After Installation
- Confirm the tensioner bolts are secure and the belt is correctly seated.
- Start the engine and observe the belt tracking and tensioner movement.
- Check for belt slipping, jumping, lateral movement or abnormal noise.
- Confirm the alternator and all belt-driven accessories operate normally.
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.