2007-2009 Saturn Vue 2.4L | Tensioner | SK107154 - PHILTOP

2007-2009 Saturn Vue 2.4L | Tensioner | SK107154 - PHILTOP

Quiet Operation

Slip Resistant

Corrosion & Heat-Resistant Housing

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
68ISETB3117US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Belt Included
No
Pulley Outer Diameter
2.76 in
Items Included
1x Engine Timing Belt Tensioner - SK107154
Quantity
1
Warranty Period
2-Year
Part Number
SK107154

Highlights

  • [Fitment]: PHILTOP Belt Tensioner with Pulley Replacement For ① Buick LaCrosse 2012-2016 2.4L, Regal 2016 2.4L, ② Chevrolet Malibu 2008-2010, 2013-2014 2.4L, Impala 2014 2.4L, ③ Saturn Vue 2007-2009 2.4L, Aura 2007-2009 2.4L
  • [OE Reference Number]: 12663047, 12655192, SK107154, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
  • [Labyrinth Seal Protection]: PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
  • [Long service life]: The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
  • [Strong stability]: Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 201620122012 - 20162012201620142013 - 20142008 - 20102007 - 200820092007 - 20082009
MakeBuickBuickBuickBuickBuickChevroletChevroletChevroletSaturnSaturnSaturnSaturn
ModelLaCrosseLaCrosseLaCrosseLaCrosseRegalImpalaMalibuMalibuAuraAuraVueVue
TrimBaseConvenienceLeatherPremiumBaseEcoEcoHybridGreen LineHybridGreen LineHybrid
Engine2.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L4
Note------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
  • Inspect the pulleys for binding, looseness or abnormal bearing noise.
  • Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
  • Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
  • Disconnect the negative battery cable before installation.

Installation Steps

  • Step-1: Photograph or record the belt-routing path before removing the belt.
  • Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
  • Step-3: Remove the belt and tensioner, then clean the mounting surface.
  • Step-4: Position the new tensioner and tighten its mounting bolts to specification.
  • Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
  • Step-6: Slowly release the tensioner and recheck the complete belt path.

After Installation

  • Confirm the tensioner bolts are secure and the belt is correctly seated.
  • Start the engine and observe the belt tracking and tensioner movement.
  • Check for belt slipping, jumping, lateral movement or abnormal noise.
  • Confirm the alternator and all belt-driven accessories operate normally.

Product Description

1belt tensioner

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Amanda_MomOfThree_414

04/30/2026

Super easy to install on my Regal. Took me less than an hour, and I'm not a mechanic. It feels just as sturdy as the original part.

AutoMom_2019_353

04/13/2026

Arrived quickly and was packaged really well. I contacted support with a quick question and they responded immediately. Top-notch service all around.

FAQS

No FAQs have been added for this product yet.