2010-2012 Subaru Outback 2.5L | Tensioner | OE#23769AA03A/39262 - PHILTOP

2010-2012 Subaru Outback 2.5L | Tensioner | OE#23769AA03A/39262 - PHILTOP

Quiet Operation

Slip Resistant

Corrosion & Heat-Resistant Housing

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
50ISETB1677US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Belt Included
No
Belt Type
V-Ribbed
Contact Surface
Smooth/Backside
Pulley Outer Diameter
2.76 in
Items Included
1x Engine Timing Belt Tensioner - 39262
Quantity
1
Warranty Period
2-Year
OE Number
23769AA03A
Part Number
39262

Highlights

  • [Fitment]: PHILTOP Belt Tensioner with Pulley Replacement For ① Subaru Outback 2010-2012 2.5L, Legacy 2010-2012 2.5L/2.5T
  • [OE Reference Number]: 23769AA03A, 39262, 999593A, 999593, 49811, 19311485, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
  • [Labyrinth Seal Protection]: PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
  • [Long service life]: The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
  • [Strong stability]: Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20122010 - 20122010 - 20122010 - 20122010 - 201120122010 - 201120122010 - 20112012
MakeSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaru
ModelLegacyLegacyLegacyLegacyOutbackOutbackOutbackOutbackOutbackOutback
Trim2.5GT2.5i2.5i Limited2.5i Premium2.5i2.5i2.5i Limited2.5i Limited2.5i Premium2.5i Premium
Engine2.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H4
Note----
VIN 4th Digit B
-
VIN 4th Digit B
-
VIN 4th Digit B
-

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
  • Inspect the pulleys for binding, looseness or abnormal bearing noise.
  • Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
  • Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
  • Disconnect the negative battery cable before installation.

Installation Steps

  • Step-1: Photograph or record the belt-routing path before removing the belt.
  • Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
  • Step-3: Remove the belt and tensioner, then clean the mounting surface.
  • Step-4: Position the new tensioner and tighten its mounting bolts to specification.
  • Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
  • Step-6: Slowly release the tensioner and recheck the complete belt path.

After Installation

  • Confirm the tensioner bolts are secure and the belt is correctly seated.
  • Start the engine and observe the belt tracking and tensioner movement.
  • Check for belt slipping, jumping, lateral movement or abnormal noise.
  • Confirm the alternator and all belt-driven accessories operate normally.

Product Description

11

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

Jason_Trucks_961

12/19/2025

Installation was a breeze on my 2.5L Outback. Fit perfectly without any issues. Much easier than some other aftermarket parts I've tried.

Mike from Texas_226

02/17/2026

Wasn't too difficult to install on my Legacy. Everything lined up perfectly. Way simpler than the last one I had to replace from another brand.

FAQS

No FAQs have been added for this product yet.

2010-2012 Subaru Outback Tensioner 23769AA03A | PHILTOP