2002-2008 Audi A4 Quattro 1.8L L4 | Tensioner | OE#06B903133E/38207 - PHILTOP

2002-2008 Audi A4 Quattro 1.8L L4 | Tensioner | OE#06B903133E/38207 - PHILTOP

Quiet Operation

Slip Resistant

Corrosion & Heat-Resistant Housing

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
91ISETB1897US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Belt Included
No
Belt Type
V-Ribbed
Contact Surface
Smooth/Backside
Pulley Outer Diameter
2.99 in
Items Included
1x Engine Timing Belt Tensioner - 38207
Quantity
1
Warranty Period
2-Year
OE Number
06B903133,06B903133A,06B903133D
Part Number
38207,06B903133E

Highlights

  • [Fitment]: PHILTOP Belt Tensioner with Pulley Replacement For ① Audi A4 Quattro 2005-2008 2.0T, 2002-2005 1.8T, A4 2005-2008 2.0T, 2002-2006 1.8T
  • [OE Reference Number]: 06B903133E, 06B903133, 06B903133A, 38207, 49340, 06B903133D, 38207M, 999074A, 305332, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
  • [Labyrinth Seal Protection]: PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
  • [Long service life]: The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
  • [Strong stability]: Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20052005 - 20082003 - 20062007 - 20082002 - 20052005 - 20082002 - 20052005 - 20082007 - 2008
MakeAudiAudiAudiAudiAudiAudiAudiAudiAudi
ModelA4A4A4A4A4 QuattroA4 QuattroA4 QuattroA4 QuattroA4 Quattro
TrimBaseBaseCabrioletCabrioletAvantAvantBaseBaseCabriolet
Engine1.8L L42.0L L41.8L L42.0L L41.8L L42.0L L41.8L L42.0L L42.0L L4
Note---------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
  • Inspect the pulleys for binding, looseness or abnormal bearing noise.
  • Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
  • Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
  • Disconnect the negative battery cable before installation.

Installation Steps

  • Step-1: Photograph or record the belt-routing path before removing the belt.
  • Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
  • Step-3: Remove the belt and tensioner, then clean the mounting surface.
  • Step-4: Position the new tensioner and tighten its mounting bolts to specification.
  • Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
  • Step-6: Slowly release the tensioner and recheck the complete belt path.

After Installation

  • Confirm the tensioner bolts are secure and the belt is correctly seated.
  • Start the engine and observe the belt tracking and tensioner movement.
  • Check for belt slipping, jumping, lateral movement or abnormal noise.
  • Confirm the alternator and all belt-driven accessories operate normally.

Product Description

1belt tensioner

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

Melany Gonzalez/ORIENTE

09/14/2026

Verified buyer

Pieza económica y barata

Emma_DailyCommute_281

04/16/2026

Installation was a breeze! Everything lined up perfectly and it bolted right on. Way easier than some other brands I've dealt with. Glad I picked this one.

FAQS

No FAQs have been added for this product yet.