2008-2012 Honda Accord 2.4L L4 | Tensioner | OE#31170R40A02/39073 - PHILTOP

2008-2012 Honda Accord 2.4L L4 | Tensioner | OE#31170R40A02/39073 - PHILTOP

Quiet Operation

Slip Resistant

Corrosion & Heat-Resistant Housing

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
18ISETB0237US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Belt Included
No
Belt Type
V-Ribbed
Contact Surface
Smooth/Backside
Pulley Outer Diameter
3.01 in
Items Included
1x Engine Timing Belt Tensioner - 39073
Quantity
1
Warranty Period
2-Year
OE Number
31170R40A02,31170R40A01,31170RLFJ01
Part Number
39073

Highlights

  • [Fitment]: PHILTOP Belt Tensioner with Pulley Replacement For ① Honda Accord 2008-2012 2.4L, Crosstour 2012-2015 2.4L, ② Acura TSX 2009, 2010-2014 2.4L
  • [OE Reference Number]: 39073, 31170R40A02, 31170R0A005, 31170R40A01, 31170RLFJ01, 31170RLHH010M2, 31170RLHH01, 31170R40A020M2, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
  • [Labyrinth Seal Protection]: PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
  • [Long service life]: The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
  • [Strong stability]: Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20142012 - 20142008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122011 - 20122012 - 20152012 - 2015
MakeAcuraAcuraHondaHondaHondaHondaHondaHondaHondaHonda
ModelTSXTSXAccordAccordAccordAccordAccordAccordCrosstourCrosstour
TrimBaseSpecial EditionEXEX-LLXLX-PLX-SSEEXEX-L
Engine2.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L4
Note----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
  • Inspect the pulleys for binding, looseness or abnormal bearing noise.
  • Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
  • Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
  • Disconnect the negative battery cable before installation.

Installation Steps

  • Step-1: Photograph or record the belt-routing path before removing the belt.
  • Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
  • Step-3: Remove the belt and tensioner, then clean the mounting surface.
  • Step-4: Position the new tensioner and tighten its mounting bolts to specification.
  • Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
  • Step-6: Slowly release the tensioner and recheck the complete belt path.

After Installation

  • Confirm the tensioner bolts are secure and the belt is correctly seated.
  • Start the engine and observe the belt tracking and tensioner movement.
  • Check for belt slipping, jumping, lateral movement or abnormal noise.
  • Confirm the alternator and all belt-driven accessories operate normally.

Product Description

1ETB02301

Reviews

4.7/5

Based on 6 reviews

583%
40%
317%
20%
10%

Guy in Houston

07/27/2025

Verified buyer

It's been a few months and so far so good, hopefully it holds up.

CarGuy_John_126

04/16/2026

Fit my Accord like a glove. No fuss, no extra parts needed. It's a direct replacement and works perfectly, just like the original did.

FAQS

No FAQs have been added for this product yet.