2000-2006 Jeep Wrangler 4.0L L6 | Tensioner | OE#4854089/38163 - PHILTOP

2000-2006 Jeep Wrangler 4.0L L6 | Tensioner | OE#4854089/38163 - PHILTOP

Quiet Operation

Slip Resistant

Corrosion & Heat-Resistant Housing

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
33ISETB0667US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Belt Included
No
Belt Type
V-Ribbed
Contact Surface
Smooth/Backside
Pulley Outer Diameter
2.76 in
Items Included
1x Engine Timing Belt Tensioner - 38163
Quantity
1
Warranty Period
2-Year
OE Number
4854089,4854089A,4854089AB,04854089A
Part Number
38163,89245,49256,305245,5813

Highlights

  • [Fitment]: PHILTOP Belt Tensioner with Pulley Replacement For ① Jeep Wrangler 2000-2006 4.0L, Grand Cherokee 1999-2004 4.0L
  • [OE Reference Number]: 38163, 4854089AB, 04854089A, 89245, 4854089, 4854089A, 49256, 04854089AB, 88997002, 305245, 5813, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
  • [Labyrinth Seal Protection]: PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
  • [Long service life]: The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
  • [Strong stability]: Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1999 - 20041999 - 20042004200220062003 - 20062005 - 20062000 - 20042000 - 20062004 - 20062005 - 20062002 - 2006
MakeJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeWranglerWranglerWranglerWranglerWranglerWranglerWranglerWrangler
TrimLaredoLimitedSpecial EditionSport65th Anniversary EditionRubiconSESaharaSportUnlimitedUnlimited RubiconX
Engine4.0L L64.0L L64.0L L64.0L L64.0L L64.0L L64.0L L64.0L L64.0L L64.0L L64.0L L64.0L L6
Note------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
  • Inspect the pulleys for binding, looseness or abnormal bearing noise.
  • Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
  • Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
  • Disconnect the negative battery cable before installation.

Installation Steps

  • Step-1: Photograph or record the belt-routing path before removing the belt.
  • Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
  • Step-3: Remove the belt and tensioner, then clean the mounting surface.
  • Step-4: Position the new tensioner and tighten its mounting bolts to specification.
  • Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
  • Step-6: Slowly release the tensioner and recheck the complete belt path.

After Installation

  • Confirm the tensioner bolts are secure and the belt is correctly seated.
  • Start the engine and observe the belt tracking and tensioner movement.
  • Check for belt slipping, jumping, lateral movement or abnormal noise.
  • Confirm the alternator and all belt-driven accessories operate normally.

Product Description

1ETB00601

Reviews

4.9/5

Based on 8 reviews

588%
413%
30%
20%
10%

caleb harhen

12/07/2025

Verified buyer

Part fit exactly as described. Some aftermarket parts don't fit but this one did.

Ruben Martinez

10/20/2025

Verified buyer

good job

FAQS

No FAQs have been added for this product yet.