2007-2011 Jeep Wrangler 3.8L V6 | Tensioner | OE#53032860AA/39269 - PHILTOP

2007-2011 Jeep Wrangler 3.8L V6 | Tensioner | OE#53032860AA/39269 - PHILTOP

Quiet Operation

Slip Resistant

Corrosion & Heat-Resistant Housing

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
44ISETB0197US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Belt Included
No
Belt Type
V-Ribbed
Contact Surface
Smooth/Backside
Pulley Outer Diameter
2.76 in
Items Included
1x Engine Timing Belt Tensioner - 39269
Quantity
1
Warranty Period
2-Year
OE Number
53032860AA
Part Number
39269,89607,305607

Highlights

  • [Fitment]: PHILTOP Belt Tensioner with Pulley Replacement For ① Jeep Wrangler 2007-2011
  • [OE Reference Number]: 53032860AA, 39269, 89607, 305607, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
  • [Labyrinth Seal Protection]: PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
  • [Long service life]: The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
  • [Strong stability]: Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20112007 - 20112007 - 20112010 - 201120112007 - 20112007 - 20112010 - 20112007 - 20102007 - 2010
MakeJeepJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWrangler
Trim70th AnniversaryRubiconSaharaSportUnlimited 70th AnniversaryUnlimited RubiconUnlimited SaharaUnlimited SportUnlimited XX
Engine3.8L V63.8L V63.8L V63.8L V63.8L V63.8L V63.8L V63.8L V63.8L V63.8L V6
Note----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
  • Inspect the pulleys for binding, looseness or abnormal bearing noise.
  • Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
  • Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
  • Disconnect the negative battery cable before installation.

Installation Steps

  • Step-1: Photograph or record the belt-routing path before removing the belt.
  • Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
  • Step-3: Remove the belt and tensioner, then clean the mounting surface.
  • Step-4: Position the new tensioner and tighten its mounting bolts to specification.
  • Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
  • Step-6: Slowly release the tensioner and recheck the complete belt path.

After Installation

  • Confirm the tensioner bolts are secure and the belt is correctly seated.
  • Start the engine and observe the belt tracking and tensioner movement.
  • Check for belt slipping, jumping, lateral movement or abnormal noise.
  • Confirm the alternator and all belt-driven accessories operate normally.

Product Description

1ETB00701

Reviews

4.8/5

Based on 9 reviews

578%
422%
30%
20%
10%

STEVE BALLANTYNE

09/13/2024

Verified buyer

This put an end to the squeak on my 2011 Jeep Wrangler. It may be possible to replace only the pully and not the tensioner, but at this price - why not just replace the whole thing?

Nancy_FirstCar_412

01/11/2026

This tensioner pulley assembly looks and feels like a much more expensive part. It's a fantastic value. My Jeep is running smoother than it has in years. Highly recommend this for the price point.

FAQS

No FAQs have been added for this product yet.