2005-2010 Scion tC 2.4L L4 | Tensioner | 38216 - PHILTOP

2005-2010 Scion tC 2.4L L4 | Tensioner | 38216 - PHILTOP

Quiet Operation

Slip Resistant

Corrosion & Heat-Resistant Housing

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
35ISETB0027US

Specifications

Brand
PHILTOP
Pulley Included
Yes
Belt Included
No
Belt Type
V-Ribbed
Contact Surface
Smooth/Backside
Pulley Outer Diameter
2.76 in
Items Included
1x Engine Timing Belt Tensioner - 38216
Quantity
1
Warranty Period
2-Year
Part Number
38216

Highlights

  • (Fitment) -- PHILTOP Belt Tensioner with Pulley Replacement For tC 2006-2007, tC 2009-2010, Camry 2002-2002, Camry 2004-2006, Highlander 2003-2007, RAV4 2002-2005, Solara 2002-2003, Solara 2005-2007
  • (OE Reference Number) -- 89056024, Manufactured using the same or improved technology and quality materials as the original equipment manufacturer (OEM) components to ensure a factory match
  • (Labyrinth Seal Protection) -- PHILTOP automatic drive belt tensioner assembly with pulley adopts labyrinth seal to protect internal components, meeting or exceeding the service life requirements of the original manufacturer
  • (Long service life) -- The damping system tested hundreds of times absorbs extreme vibration to improve the life of the tensioner as well as belts and accessories
  • (Strong stability) -- Torsion round spring design used in PHILTOP tensioner provides reliable and stable tension

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20102007 - 20082005 - 20062002 - 20062002 - 20062002 - 20062001 - 20072001 - 20032004 - 2005200520052002 - 200720062004 - 20072007
MakeScionScionToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModeltCtCCamryCamryCamryCamryHighlanderRAV4RAV4RAV4RAV4SolaraSolaraSolaraSolara
TrimBaseSpecBaseLESEXLEBaseBaseBaseLSportSESE SportSLESport
Engine2.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.0L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L4
Note---------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the engine application, mounting holes, pulley size, groove count and tensioner-arm direction.
  • Inspect the pulleys for binding, looseness or abnormal bearing noise.
  • Check the tensioner arm for smooth movement, sufficient damping and fluid leakage.
  • Inspect the belt for cracks, glazing, frayed edges, contamination or stretching. Replace an aged or worn belt at the same time.
  • Disconnect the negative battery cable before installation.

Installation Steps

  • Step-1: Photograph or record the belt-routing path before removing the belt.
  • Step-2: Use a suitable breaker bar or long-handled tool to slowly release the tensioner. Do not pry against the tensioner arm.
  • Step-3: Remove the belt and tensioner, then clean the mounting surface.
  • Step-4: Position the new tensioner and tighten its mounting bolts to specification.
  • Step-5: Route the belt according to the recorded path and ensure every rib is fully seated in the pulley grooves.
  • Step-6: Slowly release the tensioner and recheck the complete belt path.

After Installation

  • Confirm the tensioner bolts are secure and the belt is correctly seated.
  • Start the engine and observe the belt tracking and tensioner movement.
  • Check for belt slipping, jumping, lateral movement or abnormal noise.
  • Confirm the alternator and all belt-driven accessories operate normally.

Product Description

1ETB05801

Reviews

4.6/5

Based on 9 reviews

567%
422%
311%
20%
10%

SarahDrives_579

11/27/2025

Fit my Highlander perfectly, no issues at all. It's a straightforward replacement that works great. Much better than dealing with older, worn-out parts.

RickFixIt_651

02/18/2026

Shipping was quick and the packaging was solid. I had a minor issue and customer service was on top of it, resolving it fast. Really happy with them.

FAQS

No FAQs have been added for this product yet.