1999-2004 Jeep Grand Cherokee 4.0L L6/4.7L V8 | 2 PC Rear Brake Caliper w/Hanger | 18B4819 - PHILTOP

1999-2004 Jeep Grand Cherokee 4.0L L6/4.7L V8 | 2 PC Rear Brake Caliper w/Hanger | 18B4819 - PHILTOP

Hanger Included

High-Performance Powder Coat

Bracket Included

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
32ISDBC6767US

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
3/8x24
Bleeder Port Thread Size
3/8x24
Bracket Included
Yes
Mounting Hardware Included
Yes
Position
Rear
Color
Red
Items Included
1x Rear Right Caliper - 18B4819 1x Rear Left Caliper - 18B4818
Surface Finish
Powder Coating
Material
Steel
Piston Material
Phenolic
Piston Diameter
1.89 in
Warranty Period
2-Year
Part Number
18B4819,18B4818

Highlights

  • [Vehicle Compatibility] The Rear brake caliper fit for 1999-2004 Grand Cherokee. OE Replcement Number: 18-B4818, 18-B4819, 18B4818, 18B4819
  • [Heavy-Duty Powder Coated Finish] Manufactured with electrostatic powder coating, creating a thicker and tougher surface than traditional spray paint. Provides long-lasting durability without peeling or flaking.
  • [Heat Resistant for High-Performance Braking] Designed to handle extreme heat generated during hard braking. Maintains color integrity and surface strength under demanding driving conditions.
  • [Superior Chip & Impact Resistance] Thicker coating layer offers excellent protection against road debris, gravel, and brake dust, ideal for daily driving and performance use.
  • [Corrosion & Rust Protection] Powder coating forms a sealed surface that resists moisture, salt, and corrosion, making it suitable for all-weather and long-term use.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1999 - 20041999 - 20041999 - 20041999 - 20042002 - 20042004200420022002
MakeJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand Cherokee
TrimLaredoLaredoLimitedLimitedOverlandSpecial EditionSpecial EditionSportSport
Engine4.0L L64.7L V84.0L L64.7L V84.7L V84.0L L64.7L V84.0L L64.7L V8
Note
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

12

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

M carter

09/07/2026

Verified buyer

Great parts fit the first time

Edward L.

04/18/2026

Verified buyer

Very good

FAQS

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.