SPECIFICATION - Position: Rear Caliper. Exhaust port size: M10x1.0. Inlet port size: 3/8x24. Mounting hardware included: Yes. Piston material: Phenolic. Number of pistons: 1. Piston outer diameter: 2.01 in
DURABLE - PHILTOP brake calipers are galvanized and undergo multiple tests to ensure the life of their parts
TIPS - Please enter your vehicle information in the upper left corner of the page. Check the accessory location information and vehicle compatibility information.
Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.
After Installation
Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
Check the guide-pin bolts, bracket bolts and brake-line fitting.
Inspect all connections for brake-fluid leaks and confirm the fluid level.
Perform a low-speed road test and confirm straight, quiet braking.
Make sure the brake and ABS warning lights are off.
Recheck for leaks and retorque the lug nuts after the road test.
Avoid hard braking during the first 200–300 km (120–180 miles).
Product Video
Product Description
Reviews
5.0/5
Based on 4 reviews
5
100%
4
0%
3
0%
2
0%
1
0%
Customer photos and videos
4
4drhtrd4drhtrd
06/17/2026
Verified buyer
Installed on a 2011 F-150 the day before vacation! OEM caliper started dragging at 148k and wore out the inside pad. These fit great and bled great. Worked well on the 1,700 mi trip. Nice finish and hardware. I’d definitely buy again at this point. Great packaging.
A
AutoMom_2019_378
04/21/2026
Fit my Ford F-150 perfectly and installation wasn't too difficult. It feels just as good as the original part, if not better. I'm really happy with the performance and the price point.
FAQS
Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.
Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.
Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2004-2011 Ford F-150 3.5L | 2 PC Rear Brake Caliper w/Hanger | 18P4858 - PHILTOP
Hanger Included
Bracket Included
Built to Last
SKU:
69ISDBC5007US
5.0
$96.99$9699
Check if this fits your vehicle
Select a vehicle to check this product.
Piston Count
1
Inlet Port Thread Size
3/8x24
Bleeder Port Thread Size
M10x1.0
Bracket Included
Yes
Mounting Hardware Included
Yes
Position
Rear
Color
Silver
Items Included
1x Rear Right Caliper - 18P4858 1x Rear Left Caliper - 18P4859
APPLICABLE MODELS - 2004-2011 F150, 2006-2008 Mark LT
SPECIFICATION - Position: Rear Caliper. Exhaust port size: M10x1.0. Inlet port size: 3/8x24. Mounting hardware included: Yes. Piston material: Phenolic. Number of pistons: 1. Piston outer diameter: 2.01 in
DURABLE - PHILTOP brake calipers are galvanized and undergo multiple tests to ensure the life of their parts
TIPS - Please enter your vehicle information in the upper left corner of the page. Check the accessory location information and vehicle compatibility information.
Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.
After Installation
Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
Check the guide-pin bolts, bracket bolts and brake-line fitting.
Inspect all connections for brake-fluid leaks and confirm the fluid level.
Perform a low-speed road test and confirm straight, quiet braking.
Make sure the brake and ABS warning lights are off.
Recheck for leaks and retorque the lug nuts after the road test.
Avoid hard braking during the first 200–300 km (120–180 miles).
Product Video
Product Description
Reviews
5.0/5
Based on 4 reviews
5
100%
4
0%
3
0%
2
0%
1
0%
Customer photos and videos
4
4drhtrd4drhtrd
Jun 17,2026
Verified buyer
Installed on a 2011 F-150 the day before vacation! OEM caliper started dragging at 148k and wore out the inside pad. These fit great and bled great. Worked well on the 1,700 mi trip. Nice finish and hardware. I’d definitely buy again at this point. Great packaging.
A
AutoMom_2019_378
Apr 21,2026
Fit my Ford F-150 perfectly and installation wasn't too difficult. It feels just as good as the original part, if not better. I'm really happy with the performance and the price point.
FAQS
Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.
Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.
Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.