2008-2012 Honda Accord 2.4L | 2 PC Rear Brake Caliper w/Hanger | 19B3359 - PHILTOP

2008-2012 Honda Accord 2.4L | 2 PC Rear Brake Caliper w/Hanger | 19B3359 - PHILTOP

Hanger Included

High-Performance Powder Coat

Bracket Included

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
26ISDBC6667US

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M10x1.25
Bracket Included
Yes
Mounting Hardware Included
Yes
Position
Rear
Color
Red
Items Included
1x Rear Right Caliper - 19B3358 1x Rear Left Caliper - 19B3359
Surface Finish
Powder Coating
Material
Steel
Piston Material
Steel
Piston Diameter
1.5 in
Warranty Period
2-Year
Part Number
19B3359,19B3358

Highlights

  • [Vehicle Compatibility] The Rear brake caliper fit for 2008-2012 Accord, 2009-2014 TSX. OE Replcement Number: 19-B3358, 19-B3359, 19B3358, 19B3359
  • [Heavy-Duty Powder Coated Finish] Manufactured with electrostatic powder coating, creating a thicker and tougher surface than traditional spray paint. Provides long-lasting durability without peeling or flaking.
  • [Heat Resistant for High-Performance Braking] Designed to handle extreme heat generated during hard braking. Maintains color integrity and surface strength under demanding driving conditions.
  • [Superior Chip & Impact Resistance] Thicker coating layer offers excellent protection against road debris, gravel, and brake dust, ideal for daily driving and performance use.
  • [Corrosion & Rust Protection] Powder coating forms a sealed surface that resists moisture, salt, and corrosion, making it suitable for all-weather and long-term use.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20142012 - 20142010 - 20142008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122011 - 2012
MakeAcuraAcuraAcuraHondaHondaHondaHondaHondaHondaHondaHonda
ModelTSXTSXTSXAccordAccordAccordAccordAccordAccordAccordAccord
TrimBaseSpecial EditionV6EXEXEX-LEX-LLXLX-PLX-SSE
Engine2.4L L42.4L L43.5L V62.4L L43.5L V62.4L L43.5L V62.4L L42.4L L42.4L L42.4L L4
Note
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

12

Reviews

4.4/5

Based on 7 reviews

557%
429%
314%
20%
10%

DIY_Karen_121

10/03/2025

Really happy with how this looks. It's a solid part that performs well. Great value for the price, I don't think you can find better. My braking feels much more confident.

SarahDrives_604

10/24/2025

This caliper looks really good, nice and clean. For the price, it's an amazing deal. My car feels much safer to drive now. Definitely worth the upgrade.

FAQS

Many electronic parking-brake systems require a service mode before the rear caliper is removed or the piston is retracted. Follow the vehicle-specific procedure.

Inspect the slide pins, piston movement, brake hose, pad fit, parking-brake mechanism, and hydraulic pressure. Several components can cause brake drag.

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.