2011-2013 Kia Sorento 2.4L/3.5L | 2 PC Rear Brake Caliper w/Bracket w/Hanger | 19B6271 - PHILTOP

2011-2013 Kia Sorento 2.4L/3.5L | 2 PC Rear Brake Caliper w/Bracket w/Hanger | 19B6271 - PHILTOP

Hanger Included

Bracket Included

Built to Last

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
86ISDBC6427US

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M10x1.0
Bracket Included
Yes
Mounting Hardware Included
Yes
Position
Rear
Color
Silver
Items Included
1x Rear Left Caliper - 19B6271 1x Rear Right Caliper - 19B6270
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Phenolic
Piston Diameter
1.684 in
Warranty Period
2-Year
Part Number
19B6271,19B6270

Highlights

  • [Vehicle Compatibility] The Rear brake caliper fits for the following models: 2011-2013 Kia Sorento, 2010-2012 Hyundai Santa Fe. Please use Philtopconfirmedfit tool before purchasing
  • [Perfect Fit] OE specification disc brake caliper assembly, including brake caliper, bracket, phenolic piston, mounting hardware. OE Replcement Number: 19-B6270, 19-B6271, 19B6270, 19B6271, 14151646, 19B6271, 582100W000, 583100WA00,14151645, 19B6270, 582300W000, 583110WA00
  • [Ductile Iron] PHILTOP brake caliper cover is made of ductile iron. It has strong heat resistance and is not easy to deform or break
  • [Quality Pass] The quality and production process are certified by IATF16951. Each product is tested for high and low pressure sealing before leaving the factory
  • [Galvanizing Process] The surface of the caliper adopts refined galvanizing process, which has excellent anti-rust and environmental protection performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20122011 - 20122010 - 20122010 - 20122010 - 20122011 - 20122011 - 20132011 - 20132011 - 20132011 - 20132011 - 2013
MakeHyundaiHyundaiHyundaiHyundaiHyundaiKiaKiaKiaKiaKiaKia
ModelSanta FeSanta FeSanta FeSanta FeSanta FeSorentoSorentoSorentoSorentoSorentoSorento
TrimGLSGLSLimitedLimitedSEBaseEXEXLXLXSX
Engine2.4L L43.5L V62.4L L43.5L V63.5L V62.4L L42.4L L43.5L V62.4L L43.5L V63.5L V6
Note
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Phenolic Piston

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake calipers

Reviews

4.5/5

Based on 2 reviews

550%
450%
30%
20%
10%

Chris_GearHead_653

05/20/2026

Arrived well-packaged and super fast. Customer service was really helpful and friendly when I had a question. Couldn't ask for a better buying experience, honestly.

SarahDrives_260

04/09/2026

Installation was straightforward, though it was missing a tiny clip. Customer service was awesome though and sent it out super fast. All fixed up now and working great.

FAQS

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.