1990-1997/1999-2005 Mazda Miata 1.8L L4/1.6L L4 | 1 PC Rear Left Brake Caliper w/Bracket w/Hanger | 191378 - PHILTOP

1990-1997/1999-2005 Mazda Miata 1.8L L4/1.6L L4 | 1 PC Rear Left Brake Caliper w/Bracket w/Hanger | 191378 - PHILTOP

Hanger Included

Built to Last

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
50ISDBC6417US

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M7x1.0
Bracket Included
No
Mounting Hardware Included
Yes
Position
Rear, Left
Color
Silver
Items Included
1x Rear Left Caliper - 191378
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
1.248 in
Warranty Period
2-Year
Part Number
191378

Highlights

  • [Vehicle Compatibility] The Rear Left brake caliper fits for the following models: 1990-2005 Mazda Miata. Please use Philtopconfirmedfit tool before purchasing
  • [Perfect Fit] OE specification disc brake caliper assembly, including brake caliper, bracket, phenolic piston, mounting hardware. OE Replcement Number: 19-1378, 191378, 191378, 1913788, NA012671X, NA0126990, NA0126990A, NA752671X, NA752671XA, NA752671XC, NA7526990A, NAY52699ZR, NAZ52699Z, NAZ52699ZC
  • [Ductile Iron] PHILTOP brake caliper cover is made of ductile iron. It has strong heat resistance and is not easy to deform or break
  • [Quality Pass] The quality and production process are certified by IATF16954. Each product is tested for high and low pressure sealing before leaving the factory
  • [Galvanizing Process] The surface of the caliper adopts refined galvanizing process, which has excellent anti-rust and environmental protection performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year19991990 - 19931994 - 19971999 - 20002001 - 20042005199320002001 - 200420051994 - 19972004199120002001 - 200319972003
MakeMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazda
ModelMiataMiataMiataMiataMiataMiataMiataMiataMiataMiataMiataMiataMiataMiataMiataMiataMiata
Trim10th AnniversaryBaseBaseBaseBaseBaseLELSLSLSM EditionMazdaspeedSESESESTOShinsen
Engine1.8L L41.6L L41.8L L41.8L L41.8L L41.8L L41.6L L41.8L L41.8L L41.8L L41.8L L41.8L L41.6L L41.8L L41.8L L41.8L L41.8L L4
Note-
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston
-
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston;without Sport Suspension
-
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston
-
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston;without Sport Suspension
-
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston;without Sport Suspension
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston
-
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston;without Sport Suspension
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied without Mounting Bracket;with Metal Piston;without Sport Suspension

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake calipers

Reviews

4.4/5

Based on 7 reviews

557%
429%
314%
20%
10%

Tom_Handy_489

06/05/2026

Arrived quickly and everything was secure in the packaging. Had an issue with a bracket and customer service resolved it ASAP.

Tom_Handy_409

10/10/2025

Wasn't too hard to install on my Miata. Fit perfectly and works great. Glad I went with this over the pricier ones.

FAQS

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.