2010-2015 Mercedes-Benz GLK350 3.5L | Front Drive Shaft | 938241 - PHILTOP

2010-2015 Mercedes-Benz GLK350 3.5L | Front Drive Shaft | 938241 - PHILTOP

Front

Factory-Balanced

Corrosion-Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
78ISDSA1237US

Specifications

Brand
PHILTOP
Mounting Type
Cv Joint to Cv Joint
Position
Front
Fully Extended Length
25.93 in/658.5 mm
Fully Compressed Length
25.93 in/658.5 mm
Shaft Diameter
Φ40
Items Included
1x Drive Shaft - 938241
Surface Finish
Painted
Flange Shape
Round
Bolt Hole Quantity
4
Two-Piece Design
No
Adjustable Length
No
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
938241

Highlights

  • [Vehicle Fitment]: Front drive shaft assembly compatible with [Mercedes-Benz] 2008-2009 C230 AWD, 2010-2012 C250 AWD, 2008-2014 C300 AWD, 2008-2015 C350 AWD, 2009-2010 CL550(From 9/24/2008), 2014-2018 CLS63 AMG/CLS63 AMG S, 2012-2016 E300, 2010-2016 E350 AWD, 2010-2011 E550 AWD, 2014-2016 E63 AMG/E63 AMG S, 2010-2015 GLK350 AWD, 2008-2011 S450, 2007-2011 S550 AWD, 2014-2017 S63 AMG.
  • [Reference Number]: 938241, 2214101701, 2044106701, 2044102601, 2044101801.
  • [Specifications]: ①Installation location: Front ②Extended Shaft Length(In): 25 15/16 ③Collapsed Length(In): 25 15/16 ④Shaft Wall Thickness(In): 1/16 ⑤Shaft Diameter(In): Φ1 9/16 ⑥Overall Length Adjustable: No ⑦Installation Type: CV Joint Installation ⑧Package Contains: 1x Drive Shaft - 938241.
  • [Superior Corrosion Resistance]: PHILTOP drive shaft assembly built from high-strength steel and carburized for a surface hardness of HRC 58–62, delivering exceptional durability and wear resistance. Finished with zinc plating and advanced e-coating to resist road salt, moisture, and harsh winter conditions, helping protect your undercarriage from rust and corrosion.
  • [OEM-Level Quality Tested]: Each driveshaft undergoes rigorous dynamic balancing, torque load, fatigue, and precision fitment testing before leaving the factory. Engineered to minimize vibration, reduce driveline noise, and withstand heavy loads for smooth, reliable performance mile after mile. Built to deliver 120,000+ miles of dependable service and 24-month unlimited mileage guarantee.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 20142008 - 20122013 - 20142008 - 20122013 - 20142012 - 20152009201020142014 - 20182010 - 20162010 - 20112014 - 20152014 - 20162010 - 20152007 - 20112014 - 2017
MakeMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-BenzMercedes-Benz
ModelC300C300C300C300C300C350CL550CL550CLS63 AMGCLS63 AMG SE350E550E63 AMGE63 AMG SGLK350S550S63 AMG
Trim4Matic4Matic Luxury4Matic Luxury4Matic Sport4Matic Sport4Matic4Matic4Matic4Matic4Matic4Matic4Matic4Matic4Matic4Matic4MaticBase
Engine3.5L V63.0L V63.5L V63.0L V63.5L V63.5L V65.5L V85.5L V85.5L V85.5L V83.5L V65.5L V85.5L V85.5L V83.5L V65.5L V85.5L V8
Note------
From 9/24/2008
----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.6/5

Based on 5 reviews

560%
440%
30%
20%
10%

Tom_Handy_789

09/30/2025

Fit perfectly and installation was a breeze. Drives much smoother than my old one. This is a great replacement part for the price.

RickFixIt_608

04/13/2026

Fast shipping, well protected in the box. Customer service was great when I called with a question about the installation.

FAQS

No FAQs have been added for this product yet.