2005-2015 Toyota Tacoma 4.0L V6 | Rear Drive Shaft | 936731 - PHILTOP

2005-2015 Toyota Tacoma 4.0L V6 | Rear Drive Shaft | 936731 - PHILTOP

Rear

Factory-Balanced

Corrosion-Resistant

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
19ISDSA0617US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Rear
Fully Extended Length
82.68 in/2100 mm
Fully Compressed Length
79.33 in/2015 mm
Shaft Diameter
Φ73
Items Included
1x Drive Shaft - 936731
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
Yes
Adjustable Length
Yes
Tube Wall Thickness
0.08 in/2 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
936731

Highlights

  • [Vehicle Fitment]: Rear drive shaft assembly compatible with [Toyota] 2005-2015 Tacoma 4.0L 4WD Crew Cab(BedLength:73.5).
  • [Reference Number]: 936731, 3710004363.
  • [Specifications]: ①Installation location: Rear ②Extended Shaft Length(In): 82 11/16 ③Collapsed Length(In): 79 5/16 ④Shaft Wall Thickness(In): 1/16 ⑤Shaft Diameter(In): Φ2 7/8 ⑥Overall Length Adjustable: Yes ⑦Installation Type: Flange Installation ⑧Package Contains: 1x Drive Shaft - 936731.
  • [Superior Corrosion Resistance]: PHILTOP drive shaft assembly built from high-strength steel and carburized for a surface hardness of HRC 58–62, delivering exceptional durability and wear resistance. Finished with zinc plating and advanced e-coating to resist road salt, moisture, and harsh winter conditions, helping protect your undercarriage from rust and corrosion.
  • [OEM-Level Quality Tested]: Each driveshaft undergoes rigorous dynamic balancing, torque load, fatigue, and precision fitment testing before leaving the factory. Engineered to minimize vibration, reduce driveline noise, and withstand heavy loads for smooth, reliable performance mile after mile. Built to deliver 120,000+ miles of dependable service and 24-month unlimited mileage guarantee.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20152015
MakeToyotaToyota
ModelTacomaTacoma
TrimBaseTRD Pro
Engine4.0L V64.0L V6
Note--

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.5/5

Based on 4 reviews

575%
40%
325%
20%
10%

RickFixIt_322

06/08/2026

Shipped incredibly fast and arrived in perfect condition thanks to the great packaging. The customer service team was really responsive and helpful. A really positive experience overall.

Jennifer_Auto_45

06/17/2026

Got here super fast, and the packaging was really solid. Customer service was super helpful and friendly when I called with a quick question. Couldn't ask for a better online buying experience.

FAQS

No FAQs have been added for this product yet.