2009-2011 Toyota Tundra 5.7L V8 | Fuel Pump Assembly | OE#770200C090/FG1980 - PHILTOP

2009-2011 Toyota Tundra 5.7L V8 | Fuel Pump Assembly | OE#770200C090/FG1980 - PHILTOP

Carbon Commutator

Precision Ceramic Resistor

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
83ISFUP3487US

Specifications

Brand
PHILTOP
Gasket or Seal Included
No
Pressure Sensor Included
No
Strainer Included
Yes
Fuel Level Sender Assembly Included
Yes
Resistance Ohms Empty
410.0 Ω
Resistance Ohms Full
15.0 Ω
Average Flow Rating
53 GPH
In Tank or External
In Tank
Lock Ring Included
No
Material
Metal, Plastic
Maximum Pressure
52.0 PSI
Outlet Outside Diameter
0.313 in
Outlet Quantity
3
Outlet Type
Push In
Pump Structure
Turbine Impeller
Items Included
1x Fuel Pump Assembly - FG1980
Warranty Period
2-Year
OE Number
770200C090
Part Number
FG1980,P76839M

Highlights

  • #40,954 in Automotive (See Top 100 in Automotive)
  • #140 in Automotive Replacement Electric Fuel Pumps
  • Fitment: Compatible with 2009-2011 Toyota Tundra V8 5.7L FLEX, 2009-2011 Toyota Sequoia V8 5.7L FLEX.
  • Reference Number: E8942M, SP9011M, P76839M, A30432, FG1980, 770200C090, DFG1980, 150341, E8789, C0723M, 2920933, M3521022, A46537, B15112407TG, USEP8942M.
  • Related Parts: ① Fuel Pump, ② Strainer, ③Seal Ring.
  • Boost Fuel Efficiency by 20%: Delivers consistent high fuel pressure and optimal flow rate to eliminate hesitation, power loss, and rough idling. Ensures your engine receives adequate fuel supply for smoother acceleration, improved throttle response, and better fuel economy, making it run like new again.
  • Superior Durability: Engineered for longevity, this fuel pump assembly minimizes wear through premium design. It delivers consistent performance with <15% flow loss after rigorous 3500-hour endurance testing, ensuring reliable operation far beyond standard units.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20112009 - 20112009 - 20112009 - 20112009 - 20112010 - 20112009 - 2011
MakeToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelSequoiaSequoiaSequoiaTundraTundraTundraTundra
TrimLimitedPlatinumSR5BaseLimitedPlatinumSR5
Engine5.7L V85.7L V85.7L V85.7L V85.7L V85.7L V85.7L V8
Note-------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the fuel-pump sound at key-on and test the fuse, relay, power supply and ground.
  • Check fuel pressure before confirming that the pump requires replacement.
  • Compare the connector, fuel ports, mounting points and fuel-level sensor with the original unit.
  • Work in a well-ventilated area away from flames, sparks and smoking.
  • Relieve fuel-system pressure and disconnect the negative battery cable.
  • Confirm that a new fuel-pump sealing ring is available.

Installation Steps

  • Step-1: Relieve fuel pressure and clean the area around the tank opening.
  • Step-2: Label and disconnect the fuel lines and electrical connector.
  • Step-3: Remove the retaining ring using the correct tool—never strike it with a steel tool.
  • Step-4: Carefully lift out the old module without damaging the float arm.
  • Step-5: Discard the old sealing ring and install a new one.
  • Step-6: Install the new module in the correct orientation and secure the retaining ring.
  • Step-7: Reconnect the fuel lines and electrical connector, ensuring every clip is locked.

After Installation

  • Cycle the ignition ON two or three times without starting to prime the fuel system.
  • Start the engine and inspect every connection for leakage or fuel odor.
  • Verify fuel pressure and fuel-gauge operation.
  • Stop the engine immediately if a leak or strong gasoline odor is detected.
  • Avoid regularly operating the vehicle with a very low fuel level, which may overheat the pump.

Product Description

1fuel pump

Reviews

5.0/5

Based on 4 reviews

5100%
40%
30%
20%
10%

Rob_HomeGarage_972

05/17/2026

This fuel pump looks really good. I'm very impressed with the quality for the price. My Sequoia is running smoothly again thanks to this part.

Chris_GearHead_489

06/04/2026

Swapped out my old fuel pump with this one on my Sequoia. It was a bit of a job, but the part itself fit perfectly. Way cheaper than buying from the dealer.

FAQS

No FAQs have been added for this product yet.