Related Parts: ① Fuel Pump, ② Seal Ring, ③ Strainer, ④ Pressure Sensors.
20% Improved Fuel Delivery Efficiency: The commutator is made of carbon material, achieving an all-round performance leap compared with traditional copper commutators; it features superior electrical performance, shorter arc duration, stable current transmission, reduced motor energy consumption, and enhanced fuel delivery efficiency.
Superior Durability: The contacts are made of gold-palladium alloy with a melting point of up to 1450℃, featuring stable electrical conductivity, excellent corrosion resistance and wear resistance, and can achieve 1 million contact cycles without obvious damage.
Confirm the fuel-pump sound at key-on and test the fuse, relay, power supply and ground.
Check fuel pressure before confirming that the pump requires replacement.
Compare the connector, fuel ports, mounting points and fuel-level sensor with the original unit.
Work in a well-ventilated area away from flames, sparks and smoking.
Relieve fuel-system pressure and disconnect the negative battery cable.
Confirm that a new fuel-pump sealing ring is available.
Installation Steps
Step-1: Relieve fuel pressure and clean the area around the tank opening.
Step-2: Label and disconnect the fuel lines and electrical connector.
Step-3: Remove the retaining ring using the correct tool—never strike it with a steel tool.
Step-4: Carefully lift out the old module without damaging the float arm.
Step-5: Discard the old sealing ring and install a new one.
Step-6: Install the new module in the correct orientation and secure the retaining ring.
Step-7: Reconnect the fuel lines and electrical connector, ensuring every clip is locked.
After Installation
Cycle the ignition ON two or three times without starting to prime the fuel system.
Start the engine and inspect every connection for leakage or fuel odor.
Verify fuel pressure and fuel-gauge operation.
Stop the engine immediately if a leak or strong gasoline odor is detected.
Avoid regularly operating the vehicle with a very low fuel level, which may overheat the pump.
Product Description
Reviews
4.5/5
Based on 6 reviews
5
67%
4
17%
3
17%
2
0%
1
0%
W
WEV
11/23/2024
Verified buyer
This was an exact fit to replacement of the original fuel pump for the 01 Buick !! Everything was included took minimal amount of time to remove the old and reinstall the new one!! Excellent product price and quality craftsmanship!!would 09% buy again Read more
C
Chris_GearHead_498
03/26/2026
Got here really quick and the packaging was excellent. Customer service was great when I had a question about the warranty. Very happy with this purchase.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
Related Parts: ① Fuel Pump, ② Seal Ring, ③ Strainer, ④ Pressure Sensors.
20% Improved Fuel Delivery Efficiency: The commutator is made of carbon material, achieving an all-round performance leap compared with traditional copper commutators; it features superior electrical performance, shorter arc duration, stable current transmission, reduced motor energy consumption, and enhanced fuel delivery efficiency.
Superior Durability: The contacts are made of gold-palladium alloy with a melting point of up to 1450℃, featuring stable electrical conductivity, excellent corrosion resistance and wear resistance, and can achieve 1 million contact cycles without obvious damage.
Confirm the fuel-pump sound at key-on and test the fuse, relay, power supply and ground.
Check fuel pressure before confirming that the pump requires replacement.
Compare the connector, fuel ports, mounting points and fuel-level sensor with the original unit.
Work in a well-ventilated area away from flames, sparks and smoking.
Relieve fuel-system pressure and disconnect the negative battery cable.
Confirm that a new fuel-pump sealing ring is available.
Installation Steps
Step-1: Relieve fuel pressure and clean the area around the tank opening.
Step-2: Label and disconnect the fuel lines and electrical connector.
Step-3: Remove the retaining ring using the correct tool—never strike it with a steel tool.
Step-4: Carefully lift out the old module without damaging the float arm.
Step-5: Discard the old sealing ring and install a new one.
Step-6: Install the new module in the correct orientation and secure the retaining ring.
Step-7: Reconnect the fuel lines and electrical connector, ensuring every clip is locked.
After Installation
Cycle the ignition ON two or three times without starting to prime the fuel system.
Start the engine and inspect every connection for leakage or fuel odor.
Verify fuel pressure and fuel-gauge operation.
Stop the engine immediately if a leak or strong gasoline odor is detected.
Avoid regularly operating the vehicle with a very low fuel level, which may overheat the pump.
Product Description
Reviews
4.5/5
Based on 6 reviews
5
67%
4
17%
3
17%
2
0%
1
0%
W
WEV
Nov 23,2024
Verified buyer
This was an exact fit to replacement of the original fuel pump for the 01 Buick !! Everything was included took minimal amount of time to remove the old and reinstall the new one!! Excellent product price and quality craftsmanship!!would 09% buy again Read more
C
Chris_GearHead_498
Mar 26,2026
Got here really quick and the packaging was excellent. Customer service was great when I had a question about the warranty. Very happy with this purchase.