2008-2010 Honda Odyssey 3.5L V6 | 3x Aluminum Alloy Engine Mount | A4553 - PHILTOP

2008-2010 Honda Odyssey 3.5L V6 | 3x Aluminum Alloy Engine Mount | A4553 - PHILTOP

Aluminum Alloy

Fatigue-Resistant

Built to Last

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
47ISMON1EMO3817US

Specifications

Brand
PHILTOP
Items Included
1x Front Motor Mount with Hydraulic - A65016 1x Rear Motor Mount - A4553 1x Front Right Motor Mount - A4587
Position
Front, Rear, Right
Quantity
3
Material
Aluminium Alloy&Iron
Warranty Period
2-Year
OE Number
A4553,A4587,A65016,9431,EM9431,9415,EM9415,EM5925,9803,50810SDAA00

Highlights

  • Compatible with: Honda Odyssey 2010, Honda Odyssey 2008-2009 3.5L
  • OEM Quality: EM9431, 50810SHJA00, EM5925, 50830SHJA04, A4587, 50820SHJA03, 50820SHJA61
  • Longer Product Life: Use of natural rubber and ST12 stamping material, adaptable to extreme environments from -40℃ to +120℃, and 40% longer Engine Mounts life
  • Noise Reduction: Absorbs high-frequency engine vibration (20-200Hz), reducing vibration transmitted to the body by 60%-80%, significantly improving driving comfort
  • Packing List: 1x Front Motor Mount with Hydraulic :A65016+ 9803+EM-5925 1x Rear Motor Mount + A4553, 9431,EM9431 1x Front Right Motor Mount + A4587, 9415 EM-9415. Any questions about the product, please you contact my customer service

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2008 - 20102008 - 2010
MakeHondaHonda
ModelOdysseyOdyssey
TrimEXLX
Engine3.5L V63.5L V6
Note--

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

PHILTOP ENGINE MOUNTTRANSMISSION MOUNT

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

Ashley_RoadTrip_387

03/11/2026

Came in quickly and everything was secure in the box. Had a quick chat with customer service about the best way to install and they were super knowledgeable and friendly. Couldn't ask for better.

Amanda_MomOfThree_189

12/15/2025

Installation was surprisingly easy, much better than other brands I've used. They fit perfectly and my Odyssey's ride is so much smoother now. Highly recommend.

FAQS

No FAQs have been added for this product yet.

2008-2010 Honda Odyssey Engine Mount 3x Aluminum Alloy | A4553 | PHILTOP