2004-2013 Mazda 3 2.3L L4/2.5L L4/2.0L L4 | 2x Engine Mounts | A4405 - PHILTOP

2004-2013 Mazda 3 2.3L L4/2.5L L4/2.0L L4 | 2x Engine Mounts | A4405 - PHILTOP

Fatigue-Resistant

Built to Last

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
13ISMON1EMO2047US

Specifications

Brand
PHILTOP
Items Included
1x Rear Motor Mount - A4405 1x Rear Torque Strut Mount - A4418
Position
Rear
Quantity
2
Material
Rubber&Iron
Warranty Period
2-Year
Part Number
A4405

Highlights

  • [Vehicle Fitment]: Engine Mount Transmission Mount Kit Replacement For 2004-2013 Mazda 3 2.0L Naturally Aspirated, 2004-2009 Mazda 3 2.3L Naturally Aspirated, 2010-2013 Mazda 3 2.5L Naturally Aspirated, 2006-2015 Mazda 5
  • [OE Standard]: The Engine Motor and Trans Mounts are manufactured in accordance with OE standards.Reference Number: A4405, A4418
  • [Package Included]: Engine Motor Mount Transmission Mount Torque Strut Mount Set Package Included: 1x Rear Motor Mount(A4405), 1x Rear Torque Strut Mount(A4418)
  • [High Quality]: We have always been the most high -quality engine and transmission bracket manufacturer. All of our products use the highest quality raw materials. We have the most advanced laboratory equipment to test the Engine Motor and Transmission Mount Kit
  • [After Sales Service]: If you have any questions about motor mount, please contact us at any time. Please use Philtop's PartFinder to check whether this mounts are compatible with your vehicle

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 20062007 - 20092010 - 2011201220052004 - 20062007 - 20092010 - 20112012 - 20132007 - 20102012 - 20152006 - 20102012 - 20152006 - 20102012 - 2015
MakeMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazda
Model333333333555555
TrimSSSSSP23iiiiGrand TouringGrand TouringSportSportTouringTouring
Engine2.3L L42.3L L42.5L L42.5L L42.3L L42.0L L42.0L L42.0L L42.0L L42.3L L42.5L L42.3L L42.5L L42.3L L42.5L L4
Note
Solid
Rear Rear Solid
Rear 3 Base Model Rear 3 Base Model Solid
3 Base Model
Solid
Solid
Rear Rear Solid
Rear 3 Base Model Rear 3 Base Model Solid
3 Base Model
Solid
Solid
Solid
Solid
Solid
Solid

Engine Mount Important Notes

Verify Before Purchase

  • Engine Displacement: Four-cylinder, V6 and V8 versions of the same vehicle often use completely different mounts. Engine displacement is more important than the vehicle model name.
  • Transmission & Drivetrain: Automatic and manual transmissions may use different mounts. FWD, RWD and AWD vehicles may also differ in mount position and quantity.
  • Mount Position: Most vehicles use three or four mounts, including the engine-side mount, transmission-side mount, and front or rear torque mount. Each is a different part, cannot be interchanged and is rarely symmetrical from side to side.
  • Mount Type: Verify whether the original mount is solid rubber, hydraulic or electronically controlled. Active mounts with vacuum lines or electrical connectors must match exactly.

Replacement Recommendation

On vehicles with approximately 80,000 miles, more than one mount may be near the end of its service life. If only one is replaced, the worn mounts may continue allowing excessive movement, forcing the new mount to absorb the full displacement and causing premature failure.

Replace mounts on the same load axis together whenever possible. A new mount paired with a worn mount may carry excessive load and fail again quickly.

Critical Installation Notes

  • Support the engine before removing any bolts. Never allow the engine to hang from the remaining mounts.
  • Allow the engine to return to its natural resting position before applying final torque. Otherwise, the mount rubber will remain preloaded throughout its service life.

Product Description

PHILTOP ENGINE MOUNTTRANSMISSION MOUNT

Reviews

4.7/5

Based on 6 reviews

583%
40%
317%
20%
10%

Paul Godleski

09/25/2025

Verified buyer

fit and works great

Emely Payne

01/04/2025

Verified buyer

Exact replacement for shot mounts

FAQS

No FAQs have been added for this product yet.