Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

1996-2002 Toyota 4Runner 3.4L V6 | w/Gasket ,w/Drain Plug Engine Oil Pan 264315 - PHILTOP
With Drain Plug
Steel
Check if this fits your vehicle
Select a vehicle to check this product.
- SKU:
- 87ISTOP0537US
Specifications
Highlights
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
| Year | 2001 | 1996 - 2002 | 1996 - 2002 | 1995 - 2004 | 1998 | 1998 - 2000 | 1998 - 2004 | 1995 - 2000 | 2000 - 2004 | 2000 - 2004 |
|---|---|---|---|---|---|---|---|---|---|---|
| Make | Toyota | Toyota | Toyota | Toyota | Toyota | Toyota | Toyota | Toyota | Toyota | Toyota |
| Model | 4Runner | 4Runner | 4Runner | Tacoma | Tacoma | Tacoma | Tacoma | Tacoma | Tundra | Tundra |
| Trim | Base | Limited | SR5 | Base | DLX | Limited | Pre Runner | SR5 | Base | SR5 |
| Engine | 3.4L V6 | 3.4L V6 | 3.4L V6 | 3.4L V6 | 3.4L V6 | 3.4L V6 | 3.4L V6 | 3.4L V6 | 3.4L V6 | 3.4L V6 |
| Note | - | - | - | - | - | - | - | - | - | - |
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the new oil pan’s material, mounting holes and drain-plug position match the original.
- Prepare the correct gasket or oil-resistant sealant, new drain-plug washer, specified oil and filter.
- Inspect the new pan and mounting flange for cracks, deformation or damage.
- Allow the engine or transmission to cool, then support the vehicle securely with jack stands. Never work under a vehicle supported only by a jack.
Installation Steps
- Step-1: Drain the Oil:Allow the system to cool, then drain the oil completely. Hot oil may cause burns.
- Step-2: Remove the Old Oil Pan:Disconnect obstructing components, loosen the bolts diagonally, and carefully remove the pan.
- Step-3: Clean the Mating Surface:Remove all oil, debris, and old sealant. Do not scratch or sand the sealing surface.
- Step-4: Apply the Gasket or Sealant:Install a new gasket or apply an even bead of approved sealant. Do not reuse the old gasket or apply excessive sealant.
- Step-5: Install the New Oil Pan:Align the pan, hand-start all bolts, and tighten them diagonally in stages to the specified torque. Allow the sealant to cure as directed.
- Step-6: Complete the Installation:Install a new drain-plug washer, reconnect all removed components, and replace the oil filter when required.
After Installation
- Refill with the specified oil before starting the engine.
- Wait 2–3 minutes, check the oil level and top up as required.
- Idle the engine for 3–5 minutes and inspect the drain plug and sealing surface for leaks.
- Confirm that the oil-pressure warning light turns off.
- Perform a short 5–10 km road test and inspect again after the first heat cycle.
- If an oil leak or oil-pressure warning appears, shut off the engine immediately.
Product Description


Reviews
0.0/5
Based on 0 reviews
No reviews match these filters.
FAQS
Cure time depends on the sealant used. Follow the sealant manufacturer’s instructions and the vehicle service procedure before filling oil or starting the engine.
Yes, inspect the pickup tube and seal when accessible. Make sure they are clean, undamaged, and positioned correctly according to the service procedure.
Add your vehicle to ensure fitment
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
1996-2002 Toyota 4Runner 3.4L V6 | w/Gasket ,w/Drain Plug Engine Oil Pan 264315 - PHILTOP
With Drain Plug
Steel
- SKU:
- 87ISTOP0537US
Check if this fits your vehicle
Select a vehicle to check this product.
- Drain Plug Included
- Yes
- Screws Included
- No
- Gasket Included
- No
- Material
- Steel
- Surface Finish
- Powder-Coated
- Items Included
- 1x Engine Oil Pan With Drain Plug - 264315
- Color
- Black
- Warranty Period
- 2-Year
- [Vehicle Fitment]: 1995-2004 Tacoma 3.4L, 1996-2002 4Runner 3.4L, 2000-2004 Tundra 3.4L
- [Reference Part Number]: 1210162070,264315
- [Package Contents]: 1x Engine Oil Pan With Drain Plug - 264315
- [Premium Material]: Crafted from heavy-duty stamped steel with solid welded seams, this oil pan boasts exceptional strength and impact resistance against road debris and bumps. Its anti-rust coating ensures reliable durability in humid and salt-prone environments. With excellent sealing performance, it effectively prevents oil leakage, delivering sturdy and dependable performance ideal for heavy-duty use and general repair applications.
- [Perfect Fit]: This OE-compatible oil pan features precisely positioned mounting holes for straightforward installation. Its rigid structure minimizes oil sloshing under acceleration and cornering, ensuring consistent oil flow to safeguard engine components. Built to be durable and practical, it is perfectly suited for fleet maintenance and all kinds of daily driving conditions.
0 reviews
Compatible Vehicles
Check if this fits your vehicle
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 2001 | Toyota | 4Runner | Base | 3.4L V6 | - |
| 1996 - 2002 | Toyota | 4Runner | Limited | 3.4L V6 | - |
| 1996 - 2002 | Toyota | 4Runner | SR5 | 3.4L V6 | - |
| 1995 - 2004 | Toyota | Tacoma | Base | 3.4L V6 | - |
| 1998 | Toyota | Tacoma | DLX | 3.4L V6 | - |
| 1998 - 2000 | Toyota | Tacoma | Limited | 3.4L V6 | - |
| 1998 - 2004 | Toyota | Tacoma | Pre Runner | 3.4L V6 | - |
| 1995 - 2000 | Toyota | Tacoma | SR5 | 3.4L V6 | - |
| 2000 - 2004 | Toyota | Tundra | Base | 3.4L V6 | - |
| 2000 - 2004 | Toyota | Tundra | SR5 | 3.4L V6 | - |
Product Specifications
- Brand
- PHILTOP
- Drain Plug Included
- Yes
- Screws Included
- No
- Gasket Included
- No
- Material
- Steel
- Surface Finish
- Powder-Coated
- Items Included
- 1x Engine Oil Pan With Drain Plug - 264315
- Color
- Black
- Warranty Period
- 2-Year
- OE Number
- 11200R1AA00,11200RNAA00,11200RNAA01,11200RNAA02,SK264315,TOP22A,501340
- Part Number
- 264315,264382
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the new oil pan’s material, mounting holes and drain-plug position match the original.
- Prepare the correct gasket or oil-resistant sealant, new drain-plug washer, specified oil and filter.
- Inspect the new pan and mounting flange for cracks, deformation or damage.
- Allow the engine or transmission to cool, then support the vehicle securely with jack stands. Never work under a vehicle supported only by a jack.
Installation Steps
- Step-1: Drain the Oil:Allow the system to cool, then drain the oil completely. Hot oil may cause burns.
- Step-2: Remove the Old Oil Pan:Disconnect obstructing components, loosen the bolts diagonally, and carefully remove the pan.
- Step-3: Clean the Mating Surface:Remove all oil, debris, and old sealant. Do not scratch or sand the sealing surface.
- Step-4: Apply the Gasket or Sealant:Install a new gasket or apply an even bead of approved sealant. Do not reuse the old gasket or apply excessive sealant.
- Step-5: Install the New Oil Pan:Align the pan, hand-start all bolts, and tighten them diagonally in stages to the specified torque. Allow the sealant to cure as directed.
- Step-6: Complete the Installation:Install a new drain-plug washer, reconnect all removed components, and replace the oil filter when required.
After Installation
- Refill with the specified oil before starting the engine.
- Wait 2–3 minutes, check the oil level and top up as required.
- Idle the engine for 3–5 minutes and inspect the drain plug and sealing surface for leaks.
- Confirm that the oil-pressure warning light turns off.
- Perform a short 5–10 km road test and inspect again after the first heat cycle.
- If an oil leak or oil-pressure warning appears, shut off the engine immediately.
Product Description


Reviews
0.0/5
Based on 0 reviews
No reviews match these filters.
FAQS
Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.
Cure time depends on the sealant used. Follow the sealant manufacturer’s instructions and the vehicle service procedure before filling oil or starting the engine.
Yes, inspect the pickup tube and seal when accessible. Make sure they are clean, undamaged, and positioned correctly according to the service procedure.