Function:The timing chain kit can ensure the precise synchronization of various components inside the engine, is wear-resistant, ensures reliable power transmission, reduces friction, and thus ensures the normal operation of the engine and extends its service life
1-Year Warranty:With a one-year warranty, everyone is welcome to buy with confidence and enjoy smoother engine performance
Identify whether the problem comes from the tensioner, a stretched chain, damaged guides or incorrect camshaft timing.
Check the engine oil condition, oil pressure, oil passages and check valves. Blocked oil passages can quickly damage new timing components.
Confirm the kit contains the correct chains, tensioners, guides, sprockets, seals and timing-cover gasket or RTV.
Determine whether any sprocket is integrated with the camshaft and must be replaced as an assembly.
Set the engine to TDC before disassembly.
Installation Steps
Step-1: Mark the relationship between the chain and sprockets, using the colored chain links as references.
Step-2: Release the spring-loaded tensioner slowly and secure the camshafts immediately after removing the chain.
Step-3: Inspect every plastic guide and tensioner shoe for cracks. Do not force them into position.
Step-4: Clean the timing-cover surface with a plastic scraper. Do not use grinding wheels or wire brushes.
Step-5: Apply RTV only where specified and keep sealant away from oil passages.
Step-6: Pre-fill the hydraulic tensioner with clean engine oil before installation to prevent dry running at startup.
Step-7: Replace TTY crankshaft bolts and tighten them using the specified torque-plus-angle procedure.
After Installation
At first startup, immediately check the oil-pressure warning light and listen for continuous chain rattling during the first 30 seconds.
Replace the engine oil and oil filter after installation to remove metal particles and sealant residue.
Check the timing cover for leaks within the first 100 miles.
Scan for codes and perform camshaft/crankshaft position relearning when required.
Follow a 5,000–7,500-mile oil-change interval, as clean oil is critical to timing-chain life.
Product Description
Reviews
4.9/5
Based on 8 reviews
5
88%
4
13%
3
0%
2
0%
1
0%
G
Gilvânia Cândida da Silva
08/10/2025
Verified buyer
This timing chain kit included everything I needed—tensioners, guides, washers—the complete set. The parts felt sturdy and well-crafted, unlike some flimsy aftermarket kits I’ve encountered. After installation, it significantly reduced engine noise, and everything has run smoothly since.
R
RUEL REYNOLDS
08/10/2025
Verified buyer
Fantastic timing chain kit! As someone not a car expert, I can say it worked perfectly with my husband's 2000 Ford Expedition. No issues at all – easily worth 5 stars. Highly recommended to Expedition owners looking to save.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
Function:The timing chain kit can ensure the precise synchronization of various components inside the engine, is wear-resistant, ensures reliable power transmission, reduces friction, and thus ensures the normal operation of the engine and extends its service life
1-Year Warranty:With a one-year warranty, everyone is welcome to buy with confidence and enjoy smoother engine performance
Identify whether the problem comes from the tensioner, a stretched chain, damaged guides or incorrect camshaft timing.
Check the engine oil condition, oil pressure, oil passages and check valves. Blocked oil passages can quickly damage new timing components.
Confirm the kit contains the correct chains, tensioners, guides, sprockets, seals and timing-cover gasket or RTV.
Determine whether any sprocket is integrated with the camshaft and must be replaced as an assembly.
Set the engine to TDC before disassembly.
Installation Steps
Step-1: Mark the relationship between the chain and sprockets, using the colored chain links as references.
Step-2: Release the spring-loaded tensioner slowly and secure the camshafts immediately after removing the chain.
Step-3: Inspect every plastic guide and tensioner shoe for cracks. Do not force them into position.
Step-4: Clean the timing-cover surface with a plastic scraper. Do not use grinding wheels or wire brushes.
Step-5: Apply RTV only where specified and keep sealant away from oil passages.
Step-6: Pre-fill the hydraulic tensioner with clean engine oil before installation to prevent dry running at startup.
Step-7: Replace TTY crankshaft bolts and tighten them using the specified torque-plus-angle procedure.
After Installation
At first startup, immediately check the oil-pressure warning light and listen for continuous chain rattling during the first 30 seconds.
Replace the engine oil and oil filter after installation to remove metal particles and sealant residue.
Check the timing cover for leaks within the first 100 miles.
Scan for codes and perform camshaft/crankshaft position relearning when required.
Follow a 5,000–7,500-mile oil-change interval, as clean oil is critical to timing-chain life.
Product Description
Reviews
4.9/5
Based on 8 reviews
5
88%
4
13%
3
0%
2
0%
1
0%
G
Gilvânia Cândida da Silva
Aug 10,2025
Verified buyer
This timing chain kit included everything I needed—tensioners, guides, washers—the complete set. The parts felt sturdy and well-crafted, unlike some flimsy aftermarket kits I’ve encountered. After installation, it significantly reduced engine noise, and everything has run smoothly since.
R
RUEL REYNOLDS
Aug 10,2025
Verified buyer
Fantastic timing chain kit! As someone not a car expert, I can say it worked perfectly with my husband's 2000 Ford Expedition. No issues at all – easily worth 5 stars. Highly recommended to Expedition owners looking to save.