2012-2014 Volkswagen Passat 2.0L | Plastic Engine Valve Cover w/Gasket | V104473 - PHILTOP

2012-2014 Volkswagen Passat 2.0L | Plastic Engine Valve Cover w/Gasket | V104473 - PHILTOP

Gasket Included

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
75ISMON1EVC0417US

Specifications

Brand
PHILTOP
Items Included
1x Engine Valve Cover (with Pcv Valve Cover and Oil Filler Cap) 1x Valve Cover Gasket 1 Set of Bolts
Material
Plastic
Quantity
1
Warranty Period
2-Year
Part Number
V104473

Highlights

  • Vehicle Fitment: Passat 2012-2014
  • OE Number: V104473,03L103469R,03L103469C,3L103469C,031103469R,3L103469R
  • Quality tested: Valve cover gasket has undergone try-on and material testing to ensure a quality fit and reliable service
  • Easy To Install: Valve cover is strictly installed according to OE standard manufacturing, ensuring perfect installation. It prevents debris from entering the oil and damaging the valves, ensuring the normal operation of the engine valve transmission mechanism.
  • Buy with Confidence: We provide dedicated customer service and product quality assurance services, if you have any questions about the product, you can always contact our customer service!

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20142012 - 20132014
MakeVolkswagenVolkswagenVolkswagen
ModelPassatPassatPassat
TrimTDI SETDI SELTDI SEL Premium
Engine2.0L L42.0L L42.0L L4
Note
Grade: Aftermarket
Grade: Aftermarket
Grade: Aftermarket

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm vehicle fitment, mounting holes, sensor openings and PCV configuration.
  • Inspect the new cover, gasket and spark plug tube seals for cracks, deformation or damage.
  • Check for oil around the cover edge, spark plug wells and exhaust manifold.
  • Allow the engine to cool, disconnect the negative battery cable and clean dirt from around the cover.

Installation Steps

  • Step-1: Mark and disconnect the PCV hose, vacuum lines, ignition coils and wiring that obstruct removal.
  • Step-2: Loosen the cover bolts gradually and evenly. Carefully lift the cover without using metal pry tools.
  • Step-3: Clean the sealing surface with a plastic scraper and approved cleaner. Prevent debris from entering the engine.
  • Step-4: Confirm the new gasket is fully seated. Apply a small amount of RTV only at the locations specified by the service manual.
  • Step-5: Position the cover and hand-start all bolts.
  • Step-6: Tighten the bolts in a crisscross pattern over 2-3 passes using a torque wrench. Do not overtighten a plastic cover.
  • Step-7: Reconnect the PCV hose, ignition coils, wiring and vacuum lines.

After Installation

  • Confirm no wiring or hoses are pinched beneath the cover.
  • Start the engine and inspect the cover perimeter and spark plug wells for oil leaks.
  • Check for rough idle, misfires or warning lights.
  • After one complete heat cycle and cooldown, inspect the cover again for leakage.

Product Description

12

Reviews

4.5/5

Based on 2 reviews

550%
450%
30%
20%
10%

Rob_HomeGarage_696

11/05/2025

Installation was surprisingly simple, everything fit perfectly. Honestly, it was a lot easier than I anticipated. Much better than dealing with the dealership's prices.

Mike from Texas_853

10/05/2025

The delivery was quick, but the box was a bit damaged. Thankfully, customer service was great and sent out the missing small piece right away. All good now.

FAQS

No FAQs have been added for this product yet.